Digi Connect WAN Series User Manual page 82

Digi Connect WAN Family web interface
4. Device provisioning in progress...
5. Provisioning complete.
Upon successful completion of provisioning, a screen appears stating that the provisioning was
successful. Click Finish.
If provisioning fails:
The first screen of the provisioning wizard appears again. Instead, you must perform manual
provisioning.
6. Click Apply on the Mobile Configuration page to complete the provisioning.
Reprovision a Digi device
To reprovision a Digi device, simply run the Mobile Device Provisioning Wizard again.
Mobile connection settings
Mobile connection settings configure how the mobile connection is established and maintained.
Re-establish connection when no data is received for a period of time:
Inactivity timeout: Whether the mobile connection will be disconnected and re-established after no
data has been received over the link for the specified amount of time, in seconds.
SIM Selection Settings
The following options control how the Digi device chooses a SIM card to establish mobile connections.
The primary SIM will used first to try to establish a connection. If the connection is unsuccessful, the
secondary SIM will be used instead. If it is also unsuccessful, the primary and then secondary SIMs will
be tried again repeatedly.
Digi Connect WAN Family User Guide
Configuration through the web interface
82