Digi Connect WAN Series User Manual page 165

Hide thumbs Also See for Connect WAN Series:
Table of Contents

Advertisement

Digi Connect WAN Family web interface
Status: The configuration status of the SIM. It may be one of these values:
n
Not configured: A mobile service provider has not been configured. Select a provider on
l
the Mobile Configuration page.
Disabled: The SIM will not be used to establish a mobile connection. To enable, click Apply
l
on the Mobile Configuration page.
Not installed: The SIM card is not plugged into the Digi device server.
l
Primary: This is the preferred SIM to use to establish mobile connections.
l
Secondary: If a mobile connection cannot establish connection with the primary SIM, the
l
mobile connection will establish a connection with the secondary SIM.
PIN Status: The status of the PIN code that may be needed to use the SIM. It may be one of
n
these values:
Ready: The PIN is correct, or no PIN is required.
l
Waiting for PIN: A PIN is required, but has not been configured. Type a PIN on the Mobile
l
Configuration page.
PIN incorrect: The PIN is not correct. It will not be tried again to prevent locking the SIM.
l
Type a new PIN on the Mobile Configuration page.
Waiting for PUK
l
Waiting for PIN2
Waiting for PUK2: An unlock code is required. This SIM must be unlocked before you can
use it in the Digi device server.
Active: The SIM used to establish a mobile connection.
n
Mobile Connection Statistics
Registration Status: The status of the modem's connection to the cellular network:
n
Not Registered: Digi device is not currently searching a new operator to register to.
l
Registered: Home network.
l
Not Registered: Digi device is currently searching a new operator to register to.
l
Registration Denied.
l
Unknown.
l
Registered - Roaming.
l
Location Area Code (aka "LAC"): The modem reports this value as a 4-hex-digit string. In the
n
mobile statistics it appears both as hex and decimal representations. For example "00C3
(195)."
Cell ID: The modem's identifier in hexadecimal and decimal, for example: "00C3 (195)."
n
Digi Connect WAN Family User Guide
Administration
165

Advertisement

Table of Contents
loading

Table of Contents