Digi Connect WAN Series User Manual page 133

Digi Connect WAN Family web interface
To set access settings:
1. Select Configuration > Users.
2. Click a user under User Name.
3. Click User Access.
4. Enable or disable the device interface access as desired:
Allow command line access: Enables or disables access to the command line.
n
Allow web interface access: Enables or disables access to the web interface.
n
5. Click Apply. The changes take effect immediately. No logout/login is necessary.
User permissions settings
Use the User Permissions page to define whether and how users can use services and configuration
settings for the Digi Connect WAN Family product. For example, you can disable a user's access to
certain parts of the web interface, or allow them to display settings only but not change them.
The list of services and the user permissions available for them vary by Digi Connect WAN Family
product and the features supported in the product. There are several groups of services, such as
Network Configuration, Serial Configuration, System Configuration, Command Line Applications, and
System Administration, with user permissions for various features.
User permissions and effects
Permission Setting
None
Read Self
Read
Read/Write Self
Read All/Write Self
Read/Write
Execute
Restrictions on setting user permissions
A user cannot set another user's permission level higher than their own permission level, nor can a
user raise their own permission level.
Set user permissions
To set user permissions, choose one of the following options:
Set user permissions from the web interface:
n
1. Select Configuration > Users.
2. Click a user under User Name.
Digi Connect WAN Family User Guide
Effect
The user does not have permission to execute this setting.
The user can display their own settings, but cannot display settings for
other users.
The user can read the settings for all users, but does not have permission
to modify or write the settings.
The user can read and write their own settings, but does not have
permission to modify or write the settings for other users.
The user can read the settings for all users and can modify their own
settings.
The user has full permission to read and write the settings for all users.
The user has full permission to execute the settings.
Configuration through the web interface
133