Digi Connect WAN Series User Manual page 91

Digi Connect WAN Family web interface
Default Message Receiver: When Default Message Receiver receives a message via SMS, the
n
Default Message Receiver determines which SMS "user" will receive the message and
process it. This handling pertains to messages that are not enabled commands for which
command processing is performed. The choices for this option are:
Log Only: The received message is logged but otherwise not processed (default option).
l
Python: The received message is passed to the standard Python receiver. Further
l
processing of the message text is the responsibility of the Python program that is
implemented to receive SMS messages. Note that these messages are logged when they
are placed on the Python read queue.
Enable extended detail for SMS event logging (verbose): The SMS feature normally records
n
limited, relevant activities to the system event log. These log entries identify SMS initialization,
reconfiguration, and message send/receive activities. For troubleshooting purposes, you can
enable this option to record the message send and receive activity logging in greater detail.
However, this can result in filling the event log with more SMS activity records than are useful
for normal operation. Digi recommends enabling this option only when detail is required for a
limited period of time. This option is disabled (off) by default.
Python settings
Python-related settings for the SMS feature include:
Enable SMS support for Python: Enable SMS features for Python on this Digi device. When
n
this option is enabled, the remaining Python-specific SMS options may be configured. This
option is enabled (on) by default.
Received Message Queue Maximum: The number of received messages that may be placed
n
on the dedicated Python SMS message read queue awaiting processing by Python. Once this
limit is reached, new received messages are logged but discarded until the read queue falls
below this configured maximum message count. The default value for this setting is 100
messages.
Received Message Hold Time Maximum: The maximum amount of time in seconds that a
n
received message will be held on the dedicated Python SMS message read queue while waiting
for Python SMS message processing to be brought into service. This setting allows messages
to be received and queued for Python before the Python program that processes them is ready
to receive such messages, thereby eliminating loss of messages that are received before the
Python program is ready to handle them. The default value for this setting is 600 seconds (10
minutes).
Digi Connect WAN Family User Guide
Configuration through the web interface
91