Digi Connect WAN Series User Manual page 181

Digi Connect WAN Family command-line interface
set nat
Use the set nat command to configure the router and Network Address Translation (NAT) settings.
set network
Use the set network command to configure the network options.
set pmodem
Use the set pmodem command to configure the modem emulation.
set pppoutbound
Use the set pppoutbound command to configure the PPP outbound connections.
set ppp
Use the set ppp command to configure PPP connections.
set profiles
Use the set profiles command to configure the port profile for a serial port.
set realport
Use the set realport command to configure RealPort.
set rtstoggle
Use the set rtstoggle command to configure the RTS toggle.
set serial
Use the set serial command to configure the serial port options.
set service
Use the set service command to configure the network services.
set snmp
Use the set snmp command to configure SNMP, including SNMP traps, such as:
Authentication failure
n
Cold start
n
Link up
n
Login traps
n
The set snmp command also displays current SNMP settings.
Digi Connect WAN Family User Guide
Management through the command line interface
181