Digi Connect WAN Series User Manual page 47

Hide thumbs Also See for Connect WAN Series:
Table of Contents

Advertisement

Digi Connect WAN Family web interface
Service
Telnet Server
Telnet Passthrough
Transmission Control
Protocol (TCP) Echo
Transmission Control
Protocol (TCP) Passthrough
User Datagram Protocol
(UDP) Echo
User Datagram Protocol
(UDP) Passthrough
Web Server, also known as
HyperText Transfer Protocol
(HTTP)
Digi Connect WAN Family User Guide
Services provided
Allows users an interactive telnet session to the
Digi device's command-line interface. If disabled,
users cannot telnet to the device.
Allows a telnet connection directly to the serial
port, often called reverse telnet.
The format for this port number is as follows:
20<serial port number>
Replace <serial port number> with the Digi serial
port number. For example, 2001 applies to serial
port 1, 2010 applies to serial port 10, and 2016
applies to serial port 16.
Used for testing the ability to send and receive
over a TCP connection, similar to a ping.
Allows a raw socket connection directly to the
serial port, often called reverse sockets.
The format for this port number is as follows:
21<serial port number>
Replace <serial port number> with the Digi serial
port number. For example, 2101 applies to serial
port 1, 2110 applies to serial port 10, and 2116
applies to serial port 16.
Used for testing the ability to send and receive
over a UDP connection, similar to a ping.
Allows raw data to be passed between the serial
port and UDP datagrams on the network.
The format for this port number is as follows:
21<serial port number>
Replace <serial port number> with the Digi serial
port number. For example, 2101 applies to serial
port 1, 2110 applies to serial port 10, and 2116
applies to serial port 16.
You can establish secure access to configuration
web pages by requiring a user to sign in. HTTP
and HTTPS are also called Web Server or Secure
Web Server. These services control the use of
the web interface. If HTTP and HTTPS are
disabled, device users cannot use the web
interface to configure, monitor, and administer
the device.
Configuration through the web interface
Default network
port number
23
2001
7
2101
7
2101
80
47

Advertisement

Table of Contents
loading

Table of Contents