Digi Connect WAN Series User Manual page 139

Digi Connect WAN Family web interface
Application messaging engine with broadcast and receipt notification for application-to device
n
interaction.
Cache and permanent storage options for generation-based storage and ad hoc access to
n
historical device samples.
Application-focused bundles with ready-to-use illustrative applications
n
You can monitor and manage Digi devices from Remote Manager. For example:
Displaying detailed state information and statistics about a device, such as device up time,
n
amount of used and free memory, network settings, XBee network overview and detailed
information on network nodes.
Displaying and modifying mobile settings.
n
Monitoring the state of the device's connection and see a connection report and connection
n
history statistics.
Redirecting devices to a to a different destination.
n
Disconnecting devices.
n
Removing devices from the network.
n
Alarms and Notifications feature that fires an alarm and sends an email notification should a
n
specified event occur.
To learn more about the Remote Manager and the services it provides, see the Remote Manager User
Guide or go to www.digi.com/products/cloud/digi-remote-manager.
RealPort configuration
Install and configure RealPort software on each computer that uses the RealPort ports on the Digi
device. The RealPort software is available for downloading from the Digi Support site. For complete
information on installing and using RealPort software, see RealPort Installation Guide on the
Support site.
Install RealPort software
To install RealPort software from the Digi Support site:
1. Go to your product's support page:
Digi ConnectPort X2
n
Digi ConnectPort X4
n
2. Under Product Support, click the Drivers tab.
3. Select the operating system for your computer from the Operating System Specific Drivers
list.
4. Click the link for the RealPort zip file and save it to your computer.
5. Extract the files from the RealPort zip file and run the RealPort setup wizard.
RealPort Settings
Use the RealPort Configuration page to configuring the RealPort application. The available settings
are as follows:
Digi Connect WAN Family User Guide
Configuration through the web interface
Digi
139