Digi Connect WAN Series User Manual page 126

Digi Connect WAN Family web interface
registered device connect to the Remote Manager platform that is configured in the
Paged Remote Manager Connection settings.
Paged Remote Manager connections provide emergency access to your Remote Manager-
registered device that directs it to connect to Remote Manager so that you can perform
management or application operations.
You can configure a paged Remote Manager connection to disconnect an established
connection to Remote Manager and establish a connection to the Paged Remote Manager
connection, or you can configure it to defer to an established Remote Manager connection.
If you do not enable paged Remote Manager connections, the Remote Manager-registered
device refuses to receive paged connection requests via external communication. This setting
fully controls whether or not paged Remote Manager connections are allowed.
Remote Manager Server Address: The IP address or hostname of the Remote Manager
n
platform. For a paged Remote Manager connection, you do not have to provide the Remote
Manager address in the configuration settings. You can specify the Remote Manager address in
the external communication that requests the paged connection. The external communication
can override this configuration option with its own Remote Manager address selection. This
allows you to use a paged Device connection to support emergency Remote Manager device
management.
Disconnect the current Remote Manager connection before making a paged connection:
n
When enabled, the Remote Manager-registered device terminates an established connection
to Remote Manager, and then it connects to the Remote Manager platform specified in the
Paged Remote Manager Connection settings or specified in the external communication (such
as a Short Message). The external communication can disconnect an established Remote
Manager connection, thereby overriding this configuration option. This allows you to use a
paged Device connection to support emergency Remote Manager device management.
Short Messaging/Remote Manager SMS settings
Use the Remote Manager SMS Settings page to configure the Remote Manager-registered device to
be managed by Remote Manager via Short Message Service (SMS) messages.
For these Remote Manager SMS settings to work, you must enable the global SMS settings under
Mobile SMS settings. See
Enable Remote Manager SMS: Select this option to enable Remote Manager SMS support.
n
Phone Number: The phone number or short code of the Remote Manager platform. For more
n
information about the Remote Manager SMS Phone Number and Service ID fields, contact your
Digi sales Representative, or use the Remote Manager Provision command.
Service Identifier: The Service Identifier (prefix) for Remote Manager. This field is an optional
n
setting that you can use when you are using a shared short code. Redirecting the message to a
specific service under that short code requires an identifier (prefix).
Digi Connect WAN Family User Guide
Global SMS settings.
Configuration through the web interface
126