Digi Connect WAN Series User Manual page 195

Specifications and certifications
Digi Connect WAN 3G IA specifications
Specification
Environmental
Power
requirements
Dimensions
Wireless networking features
The following table shows key wireless-networking features that you can configure in Wi-Fi-enabled
Digi device. For more details and up-to-date information on support of these features, see the readme
file for your Digi device.
Digi Connect WAN Family User Guide
Ambient temperature
Relative humidity
Storage and transport
temperature
Altitude
Ethernet isolation
DC power input
Length
Width
Depth
Weight
Wireless networking features
Value
-40 to +85C (-40 to 185F)
Notes:
The ambient temperature of the unit may
n
be further limited by the ambient
temperature limits of the internal
modules.
The ambient temperature of the internal
n
modules must not be exceeded for
proper operation. Refer to the installed
module's specifications.
Relative humidity not to exceed 95% non-
condensing over the temperature range from 4C
to 45C. Above 45C, constant absolute humidity
shall be maintained.
-40 to 85C (-40 to 185F)
2000 meters (6560 feet)
1500VAC min per IEEE802.3/ANSI X3.263
Voltage input: 6-30VDC
n
Power consumption: Idle: 1.5W Max:
n
10.4W
Connector: Tension clamp connector,
n
5.08mm spacing
Positive terminal - Left
n
Negative terminal - Right
n
13.3 cm (5.25 in)
8.5 cm (3.35 in)
2.5 cm (0.97 in)
0.45 kg (1.00 lb)
195