Digi Connect WAN Series User Manual page 170

Digi Connect WAN Family web interface
Field
Current Network Gateway
Status (Non-Failover)
Digi Connect WAN Family User Guide
Description
This information reports the status of the non-failover management
of the default gateway. If Network Failover is enabled (On) and can
successfully configure a default gateway, failover always overrides
the non-failover Gateway Priority configuration.
Interface Table: The current status of all available IP network
interfaces. The table is displayed in order of the interface priority
configured in the Advanced Network Settings. For each network
interface, the following information is displayed:
Priority: The priority of the interface configured in the Advanced
Network Settings. The highest priority is 1, which is the first interface
in the configured Advanced Network Settings Interface Priority list.
Interface: The name of the network interface.
Status: The current status of this network interface. Possible status
values and their meanings:
1 - Up: The interface is up and configured in the system. This
n
interface is suitable for use as the default gateway.
0 - Down: The interface is down or not configured in the
n
system. This interface is not suitable for use as the default
gateway.
The Interface Priority order configured in the Advanced Network
Settings maintains the interface list. When any interface changes
status, the interface list is examined for the interface that has the
highest status priority, nearest the start of the list. The highest
priority interface with an Up status becomes the default gateway.
Gateway: The gateway IP address associated with the interface, or
0.0.0.0 if the interface does not have an associated gateway. An
interface with no gateway is not suitable for use as the default
gateway.
Administration
170