Table of Contents
Advertisement
Digi Connect WAN Family web interface
Mobile Antenna Settings: Selects the mobile antenna configuration.
n
Antenna diversity (two antennas): Automatically receive on either the main or auxiliary
l
antenna, depending on which antenna has a better signal. Use this setting if two antennas
are connected.
Primary antenna only: Always receive on the main antenna. Use this setting if only one
l
antenna is connected.
GSM cellular modem advanced settings
Mobile Band Settings: Select the mobile service frequency bands that you want to configure
n
in the modem.
Note
The mobile PPP connection is not automatically restarted when a band selection is
configured.
Automatic: Enables automatic service band selection by the modem. Automatic is the
l
default value. Digi recommends using the default setting unless there is a reason to
configure specific bands.
2G Only
l
3G Only
l
Manual: Selects the individual service bands that you want to configure. Improper
l
selection or combinations may result in a failure to establish a mobile connection. Select
one or more of these values: 850 MHz, 900 MHz, 1800 MHz, 1900 MHz.
Digi Connect WAN Family User Guide
Configuration through the web interface
84
Advertisement
Table of Contents
