Digi Connect WAN Series User Manual page 168

Digi Connect WAN Family web interface
Field
Current Network Failover
Status
Digi Connect WAN Family User Guide
Description
The current status of the Network Failover feature's management of
the default gateway.
Failover State: The current configured state of IP Network Failover
(On or Off).
Fallback to Non-Failover: The current configured state of the IP
Network Failover option to fall back to Non-Failover (On or Off). When
an IP Network Failover cannot configure a default gateway, it uses
the fallback option. Failure to configure a default gateway could
occur if one or more interfaces are not enabled (On) for IP Network
Failover use, or if those enabled interfaces are not Up or do not have
a gateway associated with them.
Interface Table: The current status of all available IP network
interfaces. The table is displayed in order of the interface priority
configured in the IP Network Failover settings. For each network
interface, the following information is displayed:
Priority: The interface priority that Network Failover uses. The
highest priority is 1, which is the first interface in the configured
Failover Interface Priority list.
Interface: The name of the network interface.
Status: The current failover status of this network interface. Status
values include:
1 - Responding: The interface is up and configured in the
n
system. It is currently responding to the link tests. This
interface is suitable for use as the default gateway.
2 - Up: The interface is up and configured in the system. Its
n
status has not been determined by the link tests, or no link
tests are configured. This interface may be suitable for use as
the default gateway.
3 - Not Responding: The interface is up and configured in the
n
system. However, it is not currently responding to the link
tests, and the number of consecutive test failures has reached
the threshold number configured in the IP Network Failover
settings. This interface may be suitable for use as the default
gateway.
4 - Down: The interface is down or not configured in the
n
system. However, it is not currently responding to the link
tests. This interface is not suitable for use as the default
gateway.
5 - Unknown: The interface is unknown (does not exist) in the
n
system. This interface is not suitable for use as the default
gateway.
Administration
168