Digi Connect WAN Series User Manual page 158

Digi Connect WAN Family web interface
Reset the factory settings on a Digi Connect WAN Family product from the web
interface
To reset the factory settings on the Digi Connect WAN Family device from the web interface:
1. Create a backup copy of the configuration using the Backup/Restore operation. See
Backup/Restore
2. Select Administration > Factory Default Settings. The Factory Default Settings page appears.
3. To keep the network settings for the device, such as the IP address, select the Keep network
settings check box.
4. Click Restore.
Reset the factory settings on a Digi Connect WAN Family product using the Reset
button
To reset the factory settings on a Digi Connect WAN Family product using the Reset button:
Digi Connect WAN Family User Guide
for more information.
Administration
158