Digi Connect WAN Family web interface
4. After 30 seconds, release the Reset button. At this point, on some models, the Status LED will
blink a 1-5-1 pattern. Wait for the device to boot up. At this time, the configuration is returned
to factory defaults. Now, if desired, power off the device, though this is not necessary.
Note
Powering off the device before releasing the Reset button guarantees the configuration
will NOT be reverted. Powering off the device just after releasing the Reset button will result in
an unknown configuration, possibly having some or all settings reverted to defaults.
Digi Connect WAN Family User Guide
Administration
160