Digi Connect WAN Series User Manual page 65

Digi Connect WAN Family web interface
Pre-Shared Key Settings:
n
If you select the pre-shared key authentication method in one or more of your ISAKMP Phase 1
Policies, then you will be prompted to supply the ID of the VPN device and the preshared key
used for authentication.
Use the following IP address, FQDN, or username for the remote VPN's ID: Type the
l
remote VPN device's ID in this field. Ensure the remote VPN device is configured to send
this ID.
Use the following pre-shared key to negotiate IKE security settings: Type the
l
preshared key in this field. This value must match exactly with the preshared key set on
the remote VPN device.
Digi Connect WAN Family User Guide
Configuration through the web interface
65