Digi Connect WAN Series User Manual page 127

Digi Connect WAN Family web interface
Adjust Device SMS Settings to Remote Manager recommended values: This setting applies
n
several Global SMS configuration options (as described in
required by the Remote Manager SMS feature.
Restrict Sender: Only process inbound messages for Remote Manager from the number
n
specified in the Phone Number setting. Messages from other phone numbers will be passed
on to other SMS Services on the device.
Advanced Remote Manager settings
The default settings for Remote Manager remote management work for most situations. The
advanced settings allow you to configure the idle timeout for the connection between the Remote
Manager-registered device and Remote Manager, and the keep-alive settings of the various interfaces
(TCP and HTTP for mobile and Ethernet network connections). You should only change the advanced
settings when the defaults do not properly work.
Connection Settings: These settings configure the idle timeout for the connection between
n
the Remote Manager-registered device and Remote Manager.
Disconnect when the Remote Manager Connection is idle
l
Idle Timeout: Enables or disables the idle timeout for the connection. When enabled, an
idle connection ends after the amount of time specified in the Idle Timeout setting.
Authenticate to Remote Manager with a password
l
Password: These fields are only applicable when your Remote Manager account was
configured to expect a password from the Remote Manager-registered device. Typically,
you can set this option through Remote Manager, since you need to configure the Remote
Manager-registered device and Remote Manager identically.
Digi Connect WAN Family User Guide
Configuration through the web interface
Global SMS settings) that are
127