Digi Connect WAN Series User Manual page 188

SNMP device monitoring capabilities
Download a Digi MIB
To download a Digi MIB:
1. Locate the support page for your product:
2. Under Product Support, click the Utilities tab.
3. Locate the MIB you want to view under General Diagnostics, Utilities, and MIBs.
Supported SNMP traps
You can enable or disable SNMP traps. Supported SNMP traps include:
Authentication failure
n
Login
n
Cold start
n
Link up
n
Alarms issued in the form of SNMP traps
n
A large set of MIBs define these various trap types (unsolicited status message from the device).
All products support MIBs for serial alarms/login traps/RFC 1215.
Products with the geofencing/GPS feature support MIBs for geofencing.
Products with mobile/cellular capability support MIBs for mobile alarms.
From the web interface, you can enable/disable traps at Configuration > System > SNMP >
Enable Simple Network Management Protocol (SNMP) traps.
You can configure alarms at Configuration > Alarms > Alarm Conditions > Alarm n >
Alarm Destinations > Send SNMP trap to following destination when alarm occurs.
Digi Connect WAN Family User Guide
Download a Digi MIB
188