To Exit The Configuration Interface; To Load A Configuration - HP 64751 User Manual

Chapter 5: Configuring the Emulator
Using the Configuration Interface

To exit the configuration interface

• When answering the configuration questions, choose File→Exit... from the
pulldown menu (or type <CTRL>x), and click "Yes" in the confirmation dialog box.
• From the configuration interface main menu, click the "Exit Window" button, and
click "Yes" in the confirmation dialog box.
The confirmation dialog box only appears if changes have been made to the current
configuration.
When you choose "Yes" from the confirmation dialog box, any modifications made
to the configuration which haven't been stored are lost. Choosing "No" from the
confirmation dialog box cancels the exit and keeps the emulator configuration
interface running.

To load a configuration

• In the emulator/analyzer interface, choose File→Load→Emulator Config... from
the pulldown menu, and use the File Selection dialog box to specify the
configuration file to be loaded.
• Using the command line, enter the load configuration <FILE> command.
This command loads previously created and stored configuration files.
118