9 Communication
9.2 EtherNet / IP
9.2.5 Integrating Rapid Link 5 into an EtherNet/IP network
208
Rapid Link 5 has a connection to the EtherNet/IP fieldbus system.
The Rapid Link 5 module's EtherNet/IP port has a switch.
The devices can be connected to each other in a daisy chain.
③
①
Figure 114:
Integrating Rapid Link 5 into an EtherNet/IP network
a PC
b Head controller (I/O controller)
c Switch
d EtherNet/IP cable
e Rapid Link 5 modules
f Motor(s)
→
Rapid Link 5 is not a device for household use and is designed
exclusively for use in commercial applications.
→
Observe the technical data and connection requirements descri-
bed in this manual. Any other usage constitutes improper use.
Rapid Link 5 · RAMO5 · RASP5 05/20 MN034004EN www.eaton.com
②
④
EtherNet/IP
⑤
⑥