Specific Hazard Warnings For Rasp5 - Eaton Rapid Link 5 Manual

4.2.1 Specific hazard warnings for RASP5

.
①
③
②
Figure 72: Connections in the RASP5 power section and hazard warnings
a Power plug
b Motor feeder socket
c Hazard warning (discharge time of internal DC-Link capacitors)
d Hazard warning (heat sink overtemperature)
DANGER

For RASP5, The components and connections in the power
section (power plug, motor socket) remain energized up to
5 minutes after the supply voltage has been switched off
(internal DC-Link capacitor discharging time).
DANGER
5 MIN
DANGER

High temperatures may occur on the heat sink of the RASP5
during operation.
ACHTUNG Hohe Temperatur
Rapid Link 5 · RAMO5 · RASP5 05/20 MN034004EN www.eaton.com
④
Pay attention to hazard war-
nings!
Kühlkörper nicht berühren
WARNING HOT SURFACE
Do not touch the heat sink
4 Operation
4.2 Operational warnings
Heat sink
Do not touch!
117