Parameter List; Parameter Groups - Eaton Rapid Link 5 Manual

8 Parameter list

8.1 Parameter Groups

The functions of the RAMO5 and RASP5 Rapid Link 5 modules are configu-
red using parameters that are divided into 8 groups (P0 to P7):
Table 34: Parameter Groups
Parameter Subject
group
P0 Monitor
P1 Basic
P2 Advanced Functions
P3 Mechanical brake and digital inputs
P4 Brake chopper and DC brake
P5 Communication
P6 Advanced motor control
P7 Motor
￫
The graphic of the following page (Menu structure) shows how
to switch between the parameter groups.
Default setting
By default (= unit as supplied), only parameter group 1 ("Basic") will be
accessible.
Extended parameter set
Level 2 (menu P0 to menu P7) can be accessed by entering a password in
parameter P1-14.
The default passwords are:
• Access to level 2: 101
Users can change this password as required:
• Password for level 2: with parameter P2-32
Rapid Link 5 · RAMO5 · RASP5 05/20 MN034004EN www.eaton.com
8 Parameter list
8.1 Parameter Groups
RAMO5 RASP5
✓ ✓
✓ ✓
✓ ✓
✓ ✓
– ✓
✓ ✓
✓ ✓
– ✓
165