Parameter Group 3 (Mechanical Brake And Digital Inputs) - Eaton Rapid Link 5 Manual

8 Parameter list
8.3 Parameter groups for RAMO5

8.3.4 Parameter group 3 (Mechanical brake and digital inputs)

Parameter Designation
P3-04 Brake Release Delay
P3-05 Brake Apply Delay
P3-06 SEN I1 Logic
P3-07 SEN I2 Logic
P3-08 SEN I3 Logic
P3-09 SEN I4 Logic
172
Table 37: Parameter group 3 (Digital inputs/outputs)
Description
Determines the time before the mechanical brake is
released.
Determines the time between the signal to close the brake
and disabling of the drive.
0: normally open
1: normally closed
Note:
Change only after POWER ON / OFF active
0: normally open
1: normally closed
Note:
Change only after POWER ON / OFF active
0: normally open
1: normally closed
Note:
Change only after POWER ON / OFF active
0: normally open
1: normally closed
Note:
Change only after POWER ON / OFF active
Rapid Link 5 · RAMO5 · RASP5 05/20 MN034004EN www.eaton.com
Unit Min Max
s 0 2.50
s 0 25.0
0
– 0 1
– 0 1
–
–
DS
0
0
0
0