Dx-Key-Oled Operating Unit Elements - Eaton Rapid Link 5 Manual

7.2.1 DX-KEY-OLED operating unit elements

Table 30: Elements (buttons) of the DX-KEY-OLED operating unit
Button Command
OK
START
STOP
UP
DOWN
Rapid Link 5 · RAMO5 · RASP5 05/20 MN034004EN www.eaton.com
7.2 Parameterization using OLED operating unit
Explanation
• Navigating in parameter mode
• Opens and closes the parameter interface
(Press and hold the button for more than two seconds)
• Saves parameter changes
• Parameter selection
• Reset – Reset after an error message
• Increment numeric value or parameter number.
• Decrement numeric value or parameter number.
7 Parameterization
161