Configure Specialist Settings; Commissioning - Eaton Rapid Link 5 Manual

5.7 Configure specialist settings

5.7.1 Commissioning

400/480 V AC
Before commissioning the RAMO5 motor starter, the functions must be
adjusted using parameters. The screw plug must be opened to adjust the
parameters.
①
230 / 400 V ∆ / 
1.1
M
1430
3 ~
Figure 79: RJ 45 interface
The parameterization can be via :
• drivesConnect software
• Keypad
• drivesConnect mobile app
ATTENTION
The RJ45 interface is not designed for Ethernet communication.
Rapid Link 5 · RAMO5 · RASP5 05/20 MN034004EN www.eaton.com
4.6 / 2.6 A
ϕ
cos
kW 0.81
min -1 50 Hz
5 RAMO5 motor starter
5.7 Configure specialist settings
129