How to select a Language
Press System 7.
Then Preferences.
Then Language.
Then choose from the following:
Startup Mode
The Startup Mode setting determines the mode that becomes active (visible) when
User Preset is set to OFF (Factory Preset) and the FieldFox is powered ON. Learn
more about User Preset on page 126.
How to set Startup Mode
Press System 7
Then
Then
Then scroll to Startup Mode and press Edit.
Then repeatedly press the
Battery Saver
When the battery saver is OFF, the source power is left ON at the end of the sweep
which consumes more power. This feature is used in CAT, NA and VVM modes.
How to set Battery Saver
Press System 7
Then
Then
System Settings
English
o
– Spanish
Espanol
o
– German
Deutsch
o
– Italian
Italiano
o
– French
Francais
o
Russian
o
Japanese
o
Chinese
o
Turkish
o
Preferences
Preferences
is the factory default mode for your FieldFox model.
<Default>
o
Built-in Power Meter Mode is NOT allowed as a Startup Mode.
o
Preferences
Battery Saver
ON – Default setting. To conserve battery power, the RF source power is turned
o
OFF at the end of each CAT, NA, and VVM mode sweep. This behavior does not
impact FieldFox measurements.
to scroll through the available choices.
Startup Mode
137