Marker Table; Coupled Markers - Keysight N9923A FieldFox User Manual

How to Create a Delta Marker
 Create a Normal marker and move it to the reference position.
 Press Delta. The marker becomes the reference marker. It becomes fixed at its X-
 Move the Delta marker by entering a value with the numeric keypad, by using the
 Press
How to move the Reference marker
 Press
 Move the marker to the new position.
 Then press

Marker Table

The Marker Table can be displayed at the bottom of the FieldFox screen. It can
display information for up to 6 markers in a full-width window, and up to 3 markers
for a half-width window (NA mode). The marker table "squeezes" the graticule area
when activated.
How to display the Marker table
 Press Marker.
 Then

Coupled Markers

Coupled Markers, available in NA Mode only, allows you to simultaneously create
and move markers that have the same number for all traces. For example, when
marker 2 is created on a trace, a marker 2 is created for ALL traces. When any
marker 2 is moved, they all move together to the same X-axis position.
 Coupled markers are relevant only in multi-trace configurations.
 All markers are either coupled or uncoupled. There can NOT be one marker
 Peak functions move the marker to the peak on the active trace, while all other
112
Axis position.
▲|▼ arrows, or using the rotary knob.
when finished.
Enter
to turn the Delta marker OFF.
Delta
again, to turn the Delta marker back ON.
Delta
Marker Table On
coupled and another uncoupled.
markers move to the same X-axis position.
Off.
FieldFox User's Guide