Keysight N9923A FieldFox User Manual page 78

Power Meter Mode
Power Meter measurements, available with Option 302, are made with Keysight USB
power sensors. Power readings are displayed on the FieldFox screen.
In this Chapter
Supported Power Sensors .................................... 78
How to Connect the Power Sensor ...................... 78
Average/Peak ........................................................ 79
Zeroing .................................................................. 79
Set Frequency ....................................................... 80
Set Source Control .............................................. 80
Set Scale ............................................................... 81
Set Relative and Offset Power .............................. 81
Set Display Units .................................................. 82
Set Averaging ....................................................... 82
Single/Continuous ................................................ 83
Step Detection Mode ............................................ 83
Set Limits .............................................................. 83
See Also
Frequency Offset using Power Sensor ................. 85
Supported Power Sensors
For a complete list of supported Keysight USB Power Sensors, please visit:
www.keysight.com/find/usbsensorsforfieldfox
NOTE The FieldFox does NOT support the following Keysight USB Power Sensor features:
External Triggering (Time Gated Burst Power Measurement), Power Sweep
Operation, and Frequency Sweep Operation. External Zeroing is NOT allowed on the
U2020 X-series Power Sensors.
78 FieldFox User's Guide