Keysight N9923A FieldFox User Manual page 17

Top Panel
Caption Description
Port 1 For CAT and NA measurements, contains source and A / R1 receivers.
Maximum: ±50 VDC, +23 dBm RF
Ext Trig/Ext Ref External Reference BNC connector to connect to an external
frequency reference. Maximum: 5.5 VDC.
External Triggering is not used on the N9923A.
Port 2 For CAT and NA mode, contains source and B / R2 receivers.
Maximum: ±50 VDC, +23 dBm RF.
Side Panel
Caption Description
Ethernet cable connector to read trace data using the FieldFox Data Link
Software.
Reserved for future use.
DC power connector used to connect to the AC/DC adapter. Maximum: 19
VDC, 4 ADC.
Micro Secure Digital slot. Use to extend the memory of the FieldFox.
Standard USB connector used to connect a power sensor for Power Meter
Mode. Also used to save files to a USB flash drive.
Use of Keyboard and Mouse is NOT supported.
Audio output jack.
Preparing for Initial Use of Your New FieldFox
Learn More
CAT Mode on page 44
NA Mode on page 20
Ext Ref on page 139
CAT Mode on page 44
NA Mode on page 20
Learn More
Data Link webpage
On page 12
File locations on page
124
File locations on page
124
17