Pulse Measurements Mode - Option 330
Pulsed power meter measurements, available with Option 330, are made with
Keysight U2020 X-Series USB Peak Power Sensors. These sensors are capable of
detecting, measuring, and storing data from a train of pulses at the RF input. This
data is queried from the USB Power Sensor and displayed on the FieldFox screen.
You can then analyze the data using several selectable settings.
In this Chapter
Zoom Window ....................................................... 93
Scale ..................................................................... 94
Averaging .............................................................. 94
Resolution ............................................................. 96
Triggering .............................................................. 96
Marker Search ...................................................... 99
Auto Analysis ........................................................ 99
Pulse Top ............................................................ 100
Grid ..................................................................... 100
Trace Memory ..................................................... 101
NOTE
Many of the features included with the FieldFox Pulse Measurements Mode are
discussed in detail in these two documents:
Pulse Measurements Mode - Option 330
Keysight U2020 X-Series USB Peak Power Sensors Programmer's Guide.
http://literature.cdn.keysight.com/litweb/pdf/U2021-90003.pdf
91