Technical Data - Sirona SIROLaser Xtend Operating Instructions Manual

Sirona Dental Systems GmbH
Operating Instructions SIROLaser Xtend
63 18 351 D3576
D3576.201.01.05.02 11.2018

Technical Data

3.5
General
Beam guide:
Display:
Cooling:
Temperature switch:
Door contact connec-
tion:
Dimensions (W x L x H):
Weight:
SIROLaser Xtend specification
Laser type:
Wavelength:
Laser system:
Device classification:
Optical power (CW):
Optical peak power:
Emission modes:
Pulse:
Pulse duration:
IP degree of protection:
Aiming beam:
NOHD:
Optical fiber thickness:
Operation:
Nominal power input:
Insulation class:
Adapter:
Power supply:
Flexible quartz glass fiber
Full color, graphical LCD touch screen
Internal air cooling controlled by output
Software temperature switch at 48° C
Potential-free contact 5 VDC/20 mA (TTL)
182 x 197 x 189 mm
approx. 1000 g incl. handpiece
Diode laser
970 nm ± 15 nm
Class IV (according to IEC 60825-1)
Class IIb (according to Council Directive
93/42/EEC)
SIROLaser Xtend: approx. 0.5 - 5.0 W
After upgrade: approx. 0.5 - 7.0 W
SIROLaser Xtend: approx. 10 W (diode)
After upgrade: approx. 14 W (diode)
CW (continuous wave)
chopped SIROLaser Xtend: 1 Hz to
1.000 Hz
chopped after upgrade: 1 Hz to 10 kHz
peak-pulse between 600 Hz and 32 kHz
repeated pulse
Chopped mode SIROLaser Xtend: 500 µs
- 0.5 sec.
Chopped mode after upgrade: 10 µs -
0.99 sec.
Peak-pulse: 23 µs fixed
Laser unit: IP20
635 - 650 nm, max. 1 mW
From the distal end of the optical fiber: 1.5 m
200 and 320 µm
Finger switch, with electronic access key
15 V DC 6.66 A max. 100 VA MPU100-106
Class I, type B (according to IEC 60601-1)
External, 100 - 240 VAC, 50 - 60 Hz
The SIROLaser Xtend may only be operated
with the Sinpro MPU100-106 power supply.
3 System description
3.5 Technical Data
19