Sirona DAC UNIVERSAL Operating Instruction
  1. Manuals
  2. Brands
  3. Sirona Manuals
  4. Medical Equipment
  5. DAC UNIVERSAL
  6. Operating instruction

Sirona DAC UNIVERSAL Operating Instruction

Hide thumbs Also See for DAC UNIVERSAL:
Table of Contents

Advertisement

Quick Links

See also: User Manual
kÉï=~ë=çÑW=
a^`=rkfsbop^i
léÉê~íáåÖ=fåëíêìÅíáçåë
MTKOMNS
Cover page
=
båÖäáëÜ
båÖäáëÜ

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DAC UNIVERSAL and is the answer not in the manual?

Questions and answers

Related Manuals for Sirona DAC UNIVERSAL

Summary of Contents for Sirona DAC UNIVERSAL

  • Page 1 MTKOMNS kÉï=~ë=çÑW= a^`=rkfsbop^i léÉê~íáåÖ=fåëíêìÅíáçåë båÖäáëÜ båÖäáëÜ Cover page...
  • Page 2 Dear Customer, Thank you for purchasing a DAC UNIVERSAL unit. DAC UNIVERSAL cleans, oils and sterilizes / disinfects 6 instruments automatically. Wrapped and solid instruments can also be sterilized in next to no time and are therefore back in action quickly. DAC UNIVERSAL saves you time-consuming manual reprocessing and reliably protects you and your patients from cross-contamination.

  • Page 3: Table Of Contents

    3.1.2 Functions with the BASKET lid............3.1.3 Functions with the WRAPPED lid............ 3.1.4 Functions with the FLEX lid............. Controls and functional elements of the DAC UNIVERSAL ......3.2.1 Overview of the DAC UNIVERSAL ..........3.2.1.1 Overview DAC UNIVERSAL ADVANCED......3.2.1.2 Overview DAC UNIVERSAL STANDARD......
  • Page 4 4.4.1 Mounting adapters on the STANDARD lid ........4.4.2 Mounting adapters on the FLEX lid..........Setting the display language on the DAC UNIVERSAL STANDARD ... Connecting to a documentation device ............4.6.1 Connecting to a documentation device DAC UNIVERSAL ADVANCED 4.6.2...
  • Page 5 Start cycle on the FLEX lid DAC UNIVERSAL ADVANCED Cleaning and maintanance DAC UNIVERSAL ADVANCED........Checking oil supply to the chamber of the DAC UNIVERSAL ADVANCED Checking water supply to the chamber of the DAC UNIVERSAL ADVANCED Checking water supply to the lids of the DAC UNIVERSAL ADVANCED..
  • Page 6 Table of Contents Sirona Dental A/S Operating Instructions DAC UNIVERSAL Checking oil supply to the STANDARD lid of the DAC UNIVERSAL ADVANCED Drain the water tank of the DAC UNIVERSAL ADVANCED ......125 6.5.1 Drain the water tank via the menu ........... 125 6.5.2...
  • Page 7 Checking oil supply to the chamber of the DAC UNIVERSAL STANDARD. Checking water supply to the chamber of the DAC UNIVERSAL STANDARD Checking water supply to the lids of the DAC UNIVERSAL STANDARD ..Checking oil supply to the STANDARD lid of the DAC UNIVERSAL STANDARD Drain the water tank of the DAC UNIVERSAL STANDARD ......
  • Page 8 Operating Instructions DAC UNIVERSAL 9.16 Biennial Service .................... 210 Display messages DAC UNIVERSAL STANDARD ..........211 10.1 Display messages and what they mean DAC UNIVERSAL STANDARD ..212 10.2 Errors without a message ................216 10.3 Reset DAC UNIVERSAL STANDARD ............217 Accessories ......................

  • Page 9: General Information

    Customer Service Center For technical questions, use the contact form on the Internet at Contact information_Sirona www.sirona.com. Follow the menu items "CONTACT" / "Customer Service Center" and click on the "CONTACT FORM FOR TECHNICAL INQUIRIES" button. You can call our Customer Service Center at:...

  • Page 10: Versions Of The Dac Universal

    These autoclaves are in this manual known as the DAC UNIVERSAL STANDARD. CD "User E-Guide" DAC UNIVERSAL A "User E-guide" CD is included with DAC UNIVERSAL that contains all operating instructions and important technical information. Other valid documents DAC UNIVERSAL includes other separate documents. The instructions...

  • Page 11: Structure Of The Document

    Sirona Dental A/S 1 General Information Operating Instructions DAC UNIVERSAL 1.6 Structure of the document Structure of the document 1.6.1 Identification of the danger levels To prevent personal injury and material damage, please observe the warning and safety information provided in these operating instructions.

  • Page 12: Warranty And Liability

    UNIVERSAL) was subjected to a thorough quality test before it left the factory. A warranty period of 12 months is given for DAC UNIVERSAL starting on the day it is delivered. The warranty covers production and material defects and includes both replacement parts and work.

  • Page 13: Intended Use

    1 General Information Operating Instructions DAC UNIVERSAL 1.8 Intended use Intended use The DAC UNIVERSAL is intended to clean, lubricate and steam sterilize dental handpieces. Dental handpieces is defined as rotating instruments split up into the categories straight handpieces, contra angles and turbines.

  • Page 14: Scope Of Delivery

    1.10 Scope of delivery Operating Instructions DAC UNIVERSAL 1.10 Scope of delivery The scope of delivery of the DAC UNIVERSAL includes the following parts: ● STANDARD lid without adapter ● STANDARD indicator holder ● 1 bottle of NitramOil #2 lubrication concentrate ●...

  • Page 15: Safety Instructions

    2.1 Electrostatic discharge Safety instructions IMPORTANT This product is intended for use by qualified healthcare professionals only. Before operating the DAC UNIVERSAL, carefully read and follow these instructions and save them for future reference. Observe all cautions. Electrostatic discharge Protective measures Electrostatic discharge (abbreviated: ESD –...
  • Page 16 2 Safety instructions Sirona Dental A/S 2.1 Electrostatic discharge Operating Instructions DAC UNIVERSAL An electrostatic discharge is: ● perceptible at 3,000 V or higher ● audible at 5,000 V or higher (cracking, crackling) ● visible at 10,000 V or higher (arc-over) The transient currents resulting from these discharges have a magnitude of over 10 amps.

  • Page 17: Caution Symbols On The Device

    Caution symbols on the device Meaning: Warning of danger This symbol is found on the back of the DAC UNIVERSAL next to: ● The COM PORT: External computer hardware that is connected to this serial interface must be labeled "The connected device must comply with the UL 1950 and IEC/EN 60950 standards and may be connected only to safety extra low voltage (SELV) circuits."...

  • Page 18: Flammable Materials

    UNIVERSAL when it opens, as steam will emerge from the device. CAUTION Danger of burning! Even when the lid of the DAC UNIVERSAL is partly or completely open, the instruments are still hot. Allow the instruments that become very hot during the process to cool off.

  • Page 19: Instruction Of Practice Personnel

    DAC UNIVERSAL. Installation site CAUTION Risk of crushing! The total height of the open DAC UNIVERSAL is 53 cm. To prevent injuries, a minimum distance of 70 cm must be maintained between the counter and overhead cabinet. Maintenance...

  • Page 20: Product Description

    5 unwrapped solid instruments. The WRAPPED lid and a sterile filter are needed for sterilizing wrapped instruments in the DAC UNIVERSAL. The WRAPPED lid holds 3 instruments at a time. The optional FLEX lid is available for the cleaning and thermal Function FLEX lid disinfection of a maximum of 6 unwrapped instruments.
  • Page 21 20 to 30 minutes. To ensure trouble-free operation, accumulated operating time of rotating handpiece treated in DAC UNIVERSAL shall not exceed 10 minutes. External cleaning The instruments are first cleaned 3 times with cold water in a pulse-wash procedure (multicyclic cleaning method).

  • Page 22: Functions With The Basket Lid

    Functions STANDARD lid with ADVANCED "Reprocessing with the STANDARD lid DAC UNIVERSAL ADVANCED [ → 99]" for the DAC UNIVERSAL ADVANCED and "Reprocessing with the STANDARD lid DAC UNIVERSAL STANDARD [ → 172]" for the DAC UNIVERSAL STANDARD. 3.1.2 Functions with the BASKET lid Five solid instruments, instruments without cavities, can be reprocessed in the DAC UNIVERSAL with the optional BASKET lid.

  • Page 23: Functions With The Wrapped Lid

    For instructions on reprocessing solid instruments see "Reprocessing Functions BASKET lid with ADVANCED with the BASKET lid DAC UNIVERSAL ADVANCED [ → 104]" for the DAC UNIVERSAL ADVANCED and „Reprocessing with the BASKET lid DAC UNIVERSAL STANDARD [ → 177]“ for the DAC UNIVERSAL STANDARD.

  • Page 24: Functions With The Flex Lid

    Functions WRAPPED lid with ADVANCED "Reprocessing with the WRAPPED lid DAC UNIVERSAL ADVANCED [ → 110]" for the DAC UNIVERSAL ADVANCED and "Reprocessing with the WRAPPED lid DAC UNIVERSAL STANDARD [ → 182]" for the DAC UNIVERSAL STANDARD. 3.1.4 Functions with the FLEX lid The unwrapped FLEX lid instruments are reprocessed as follows using the appropriate adapter on the FLEX lid.
  • Page 25 To select the program, see "Programs and program selection [ → 33]". For instructions for reprocessing FLEX lid instruments see "Reprocessing with the FLEX lid DAC UNIVERSAL ADVANCED [ → 115]" for the DAC UNIVERSAL ADVANCED and "Reprocessing with the FLEX lid DAC UNIVERSAL STANDARD [ →...

  • Page 26: Controls And Functional Elements Of The Dac Universal

    „Overview DAC UNIVERSAL ADVANCED [ → 26]“. For an overview of the DAC UNIVERSAL STANDARD see „Overview DAC UNIVERSAL STANDARD [ → 27]“. Please refer to „Versions of the DAC UNIVERSAL [ → 10]“ in order to Link_versions of the DAC U. differentiate between these versions.

  • Page 27: Overview Dac Universal Standard

    Sirona Dental A/S 3 Product description Operating Instructions DAC UNIVERSAL 3.2 Controls and functional elements of the DAC UNIVERSAL 3.2.1.2 Overview DAC UNIVERSAL STANDARD Lubrication concentrate and oil dispenser Water tank Display with keyboard Safety ring 60 53 362 D3472 D3472.201.10.20.02 07.2016...

  • Page 28: Lid

    3.2 Controls and functional elements of the DAC UNIVERSAL Operating Instructions DAC UNIVERSAL 3.2.2 The following lids can be used for reprocessing in the DAC UNIVERSAL: ● STANDARD lid for reprocessing unwrapped rotating handpieces. STANDARD lid_DAC U. ADVANCED See "Functions with the STANDARD lid [ → 20]" for functions and "Reprocessing with the STANDARD lid DAC UNIVERSAL...

  • Page 29: Display And Key Pad

    3.2.3.1 Display and keyboard DAC UNIVERSAL ADVANCED A: Display In the standby state the DAC UNIVERSAL shows the ready screen. During the execution of a program the display will show the current progress. B: "Up"-Key This key is used to select the lid type or navigate through the menu system.

  • Page 30: Display And Keyboard Dac Universal Standard

    When lubrication is activated, a blue LED control lamp lights up. Pressing the "Lubricate"- Key when it is switched on activates and deactivates lubrication. When the blue control (Lubrication) lamp is off, lubrication is deactivated. H: "Start"-Key This key switches the DAC UNIVERSAL on and starts it. 60 53 362 D3472 D3472.201.10.20.02 07.2016...

  • Page 31: Back Of Unit

    When this lamp lights up, an error has occurred. The message is shown on the display. It is important to check any error that occurs. See "Display messages DAC UNIVERSAL STANDARD [ → 211]" for a list of all messages.

  • Page 32: Safety Ring

    Operating Instructions DAC UNIVERSAL 3.2.5 Safety ring The DAC UNIVERSAL is equipped with a safety ring that serves as a cycle confirmation tool and prevents users from pinching their fingers when closing the lid. If there is an object between the chamber and the lid when the lid closes, the cycle is stopped immediately.

  • Page 33: Nitramoil #2 Lubrication Concentrate

    The NitramOil #2 lubrication concentrate is for lubricating the transmission channels of the instruments and is screwed into the oil dispenser in the DAC UNIVERSAL. NitramOil #2 can be used only with the following DAC UNIVERSAL serial numbers: ● 14,000 – 99,999 ●...
  • Page 34 3.3 Programs and program selection Operating Instructions DAC UNIVERSAL IMPORTANT Select DAC U. ADVANCED lid When using the DAC UNIVERSAL ADVANCED, be sure to select the correct lid type. IMPORTANT When using the DAC UNIVERSAL STANDARD, select the lid type when beginning a cycle.

  • Page 35: Technical Data

    Type: Not applicable Type BF applied part: Not applicable Safety class: Never use the DAC UNIVERSAL in the presence of flammable anesthetics or gases. Cycle length: 16 – 32 minutes Operating conditions: Temperature: 16 °C to 26 °C (61 °F to 79 °F) The DAC UNIVERSAL must not be stored at temperatures below 0°C (32°F), while in operating...
  • Page 36 3 Product description Sirona Dental A/S 3.4 Technical data Operating Instructions DAC UNIVERSAL The DAC UNIVERSAL complies with the requirements of the RoHS Directive 2011/65/EU. Symbols on the DAC UNIVERSAL packaging/external carton This way up Keep away from rain Handle with care Use no hooks Temperature limit: -40 °...

  • Page 37: Presentation Of The Sterilization Process

    Sirona Dental A/S 3 Product description Operating Instructions DAC UNIVERSAL 3.5 Presentation of the sterilization process Presentation of the sterilization process The following graphs show an overview of the process. This process overview shows the different temperature and pressure levels over time.
  • Page 38 3 Product description Sirona Dental A/S 3.5 Presentation of the sterilization process Operating Instructions DAC UNIVERSAL Sensitive program The following graph shows temperature (°C) and pressure (bar) during the sensitive program, with standard settings, holding time 15 min and a total cycle time of 28 min:...
  • Page 39 Sirona Dental A/S 3 Product description Operating Instructions DAC UNIVERSAL 3.5 Presentation of the sterilization process Prion program The following graph shows temperature (°C) and pressure (bar) during the prion program, with standard settings, holding time 18 min and a total cycle time of 32 min:...
  • Page 40 3 Product description Sirona Dental A/S 3.5 Presentation of the sterilization process Operating Instructions DAC UNIVERSAL BASKET lid The following graph shows temperature (°C) and pressure (bar) during the standard program with the BASKET lid, with standard settings, holding time 3 min and a total cycle time of 16 min:...
  • Page 41 Sirona Dental A/S 3 Product description Operating Instructions DAC UNIVERSAL 3.5 Presentation of the sterilization process WRAPPED lid The following graph shows temperature (°C) and pressure (bar) during the standard program with the WRAPPED lid, with standard settings, holding time 3 min and a total cycle time of 20 min:...
  • Page 42 3 Product description Sirona Dental A/S 3.5 Presentation of the sterilization process Operating Instructions DAC UNIVERSAL FLEX lid Sterilization process FLEX lid The following graph shows temperature (°C) and pressure (bar) during the standard program with the FLEX lid, with standard settings, holding...
  • Page 43 The table below gives an overview of what is performed during which programs mentioned in "Functions [ → 20]“. Type test according to EN13060 related to Wrapped Solid Handpieces programs on the DAC UNIVERSAL instrument instrument and turbines Sterilization cycle type S load...

  • Page 44: Electromagnetic Compatibility

    DAC UNIVERSAL. Any non-medical devices connected must also comply with the IEC 60601-1-1 standard for medical devices. The DAC UNIVERSAL does not cause any harmful interference; it can be impaired by electromagnetic interference emitted by other devices, which can lead to malfunctions.

  • Page 45: Interference Immunity

    Sirona Dental A/S 3 Product description Operating Instructions DAC UNIVERSAL 3.6 Electromagnetic compatibility 3.6.2 Interference immunity The UNIT is intended for operation in the electromagnetic environment specified below. The customer or user of the UNIT should make sure that it is used in such an environment.
  • Page 46 3 Product description Sirona Dental A/S 3.6 Electromagnetic compatibility Operating Instructions DAC UNIVERSAL Interference immunity IEC 60601-1-2 test Compliance level Electromagnetic environment - tests level guidelines Conducted RF d= [1,2] √P disturbance 150 kHz to 80 MHz IEC 61000-4-6 Radiated RF interference 3 V/m d= [1,2] √P...

  • Page 47: Working Clearances

    Sirona Dental A/S 3 Product description Operating Instructions DAC UNIVERSAL 3.6 Electromagnetic compatibility 3.6.3 Working clearances Recommended working clearances The UNIT is intended for operation in an electromagnetic environment, between portable and mobile HF where radiated RF interference is checked. The customer or the user of...

  • Page 48: Safety Devices

    It is important to get a firm hold of the machine, as it is quite heavy. It is not recommended to lift the DAC UNIVERSAL and carry it over a long distance. Carrying the DAC UNIVERSAL over a short distance can cause problems for persons who are not used to lift objects as heavy as the DAC UNIVERSAL.

  • Page 49: Installation

    Risk of crushing The recommended minimum height for installing the DAC UNIVERSAL is 70 cm, in order to prevent injuries when removing the lid. If the DAC UNIVERSAL needs to be switched off completely, the power plug must be accessible. Ambient conditions...

  • Page 50: Power Supply

    Operating Instructions DAC UNIVERSAL 4.2.1 Power supply The DAC UNIVERSAL must be connected to a supply voltage of 90 VAC – 120 VAC or 190 VAC – 240 VAC, 50 – 60 Hz, 1.100 W, at a grounded socket. IMPORTANT Several power plugs are supplied with the DAC UNIVERSAL in some countries.

  • Page 51: Permanent Water Connection

    4.2.4 Waste water connection NOTICE Do not start a cycle if the DAC UNIVERSAL is not connected to the drain tank or drainage system. The DAC UNIVERSAL works only in a one-way water system, i.e. used water (waste water) is not reused.

  • Page 52: Connecting The Waste Water Tank

    IMPORTANT A drain tank other than the original one must not be used. If the DAC UNIVERSAL is not connected directly to the waste water drain, a drain tank with the condensation tube must be installed to collect waste water from the reprocessing process.

  • Page 53: Using The Lubrication Concentrate

    Fasten the adapter to the STANDARD lid with the two screws supplied. 3. Tighten the screws with the 1.5 mm Allen wrench on the STANDARD lid included with the DAC UNIVERSAL. IMPORTANT When mounting the adapters it is important that all O-rings, gaskets and screws are new.

  • Page 54: Mounting Adapters On The Flex Lid

    4 Installation Sirona Dental A/S 4.4 Mounting adapters Operating Instructions DAC UNIVERSAL 4.4.2 Mounting adapters on the FLEX lid The FLEX lid can contain 6 instruments in total, in 4 different configurations. These are following: ● 3 ultrasonic scaler handpieces or sprayvit nozzles and 3 scaler tips w/ torque wrench at a time.

  • Page 55: Setting The Display Language On The Dac Universal Standard

    Setting the display language on the DAC UNIVERSAL STANDARD We recommend that the main language in your country or the language most familiar to the users of the DAC UNIVERSAL is selected as display language. There are 6 languages available: ●...

  • Page 56: Connecting To A Documentation Device

    (or network) or a USB data logger system (e.g. Segosoft or DIOS). Printer A thermal printer is available as a DAC UNIVERSAL accessory. This is used for documenting the reprocessing cycle. See "Printer [ → 242]" for the technical data and version of the printer.

  • Page 57: Connecting To A Documentation Device Dac Universal

    4.6 Connecting to a documentation device 4.6.1 Connecting to a documentation device DAC UNIVERSAL ADVANCED To connect a documentation device to the DAC UNIVERSAL ADVANCED, please proceed as follows: ✔ The DAC UNIVERSAL is switched on. 1. Connect the documentation device to the serial interface RS 232 of the DAC UNIVERSAL using a serial cable.

  • Page 58: Connecting To A Documentation Device Dac Universal

    16. Press the "Clear"-Key until the normal display reappears.  Printer language is set. Validation The DAC UNIVERSAL has been type tested and works tested according to requirements from applicable standards. The standards also specify installation and performance tests upon installation and use.

  • Page 59: Operation Dac Universal Advanced

    5.1 Regular activities Operation DAC UNIVERSAL ADVANCED Regular activities The DAC UNIVERSAL was installed by a service technician according to Introduction regular activities the instructions in the "Installation [ → 49]" section. See below for an overview of the activities that must be conducted during the regular use of the DAC UNIVERSAL.

  • Page 60: Testing With A Chemical Indicator

    Use a commercial chemical indicator (Class 6), e.g. gke Steri-Record C- S-P-6-SV2 for the prion program. IMPORTANT All chemical indicators used in the DAC UNIVERSAL must be coated or non-paper chemical indicators. IMPORTANT Follow the manufacturer's instructions for use when using a chemical indicator.
  • Page 61 If the chemical indicator indicates that the test was not passed, do not use the instruments that were reprocessed after the time of the last successful check. Do not continue to use the DAC UNIVERSAL. Please contact your authorized dealer. 5.1.2.1.1 Using a chemical indicator with the STANDARD lid 1.
  • Page 62 5 Operation DAC UNIVERSAL ADVANCED Sirona Dental A/S 5.1 Regular activities Operating Instructions DAC UNIVERSAL 2. Attach the STANDARD indicator holder in the groove on the center post of the STANDARD lid. 3. Start a cycle. See "Reprocessing with the STANDARD lid DAC UNIVERSAL ADVANCED [ →...
  • Page 63 2. Attach the FLEX indicator holder in the groove on the center post of the FLEX lid. 3. Start a cycle. See "Reprocessing with the FLEX lid DAC UNIVERSAL ADVANCED [ → 115]" or "Reprocessing with the FLEX lid DAC UNIVERSAL STANDARD [ →...

  • Page 64: Testing With A Pcd Process Challenge Device

    An ISO/INTRAmatic adapter is needed to mount a PCD test device to the STANDARD lid. Process ✔ The DAC UNIVERSAL is switched on and ready for a cycle. ✔ Up to 5 instruments are in the DAC UNIVERSAL ready for reprocessing, see "Pre- and post-reprocessing of instruments [ →...
  • Page 65 Sirona Dental A/S 5 Operation DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL 5.1 Regular activities 7. Press the PCD test device onto the ISO/ INTRAmatic adapter until you hear and feel a slight click. 8. Put instruments into the other 5 adapters as usual.

  • Page 66: Testing With A Protein Residue Test

    Use only NitramOil #2 for the DAC UNIVERSAL. IMPORTANT In case of fire: There is maximum 200 ml / 0.043 imperial gallons of oil in the DAC UNIVERSAL. There is no danger that dangerous or harmful gases can develop in case of fire. 60 53 362 D3472...
  • Page 67 (next to the water tank). 4. Turn the oil bottle carefully clockwise until you meet resistance. 5. Close the lid of the water tank.  The oil bottle is now inserted in the DAC UNIVERSAL. 60 53 362 D3472 D3472.201.10.20.02 07.2016...

  • Page 68: Pumping Lubrication Concentrate Through The System

     The oil bottle has been replaced. Tip: You can also remove a partially used oil bottle that is not yet empty from the DAC UNIVERSAL and insert it again at a later time. 5.1.4 Pumping lubrication concentrate through the system When a new bottle of lubrication concentrate has been inserted, you must check whether oil is pumped into the chamber.

  • Page 69: Filling The Water Tank

    5.1.6 Pumping water through the system Before the DAC UNIVERSAL can be started, you must check whether water flows into the chamber. See "Checking water supply to the lids of the DAC UNIVERSAL ADVANCED [ →...

  • Page 70: Using The Menu And Display Information Dac Universal Advanced

    Operating Instructions DAC UNIVERSAL Using the menu and display information DAC UNIVERSAL ADVANCED With the DAC UNIVERSAL ADVANCED a graphical user interface has been introduced. The ready screen is the primary screen, which allows the user to get an overview of the status of the machine. It is displayed when the autoclave has been started and the automatic heating is completed.

  • Page 71: Display Information Dac Universal Advanced

    The display indicates the current status of the system as follows: The DAC UNIVERSAL has been switched on and is heating. The machine is ready to run the sensitive program: 121°C, 15 minutes holding time.
  • Page 72 5 Operation DAC UNIVERSAL ADVANCED Sirona Dental A/S 5.2 Using the menu and display information DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL Indicates that the BASKET lid has been selected for the current program. The user shall confirm that this cycle is in fact being run with this lid by pressing the “Down”-Key.
  • Page 73 Sirona Dental A/S 5 Operation DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL 5.2 Using the menu and display information DAC UNIVERSAL ADVANCED Oil is internally added to lubricate the instruments. This is only performed with the STANDARD lid. Cold & warm rinse.
  • Page 74 Indicates that it’s been two years or 3000 cycles since the last service was performed or the DAC UNIVERSAL was put into use for the first time. Reminds the user that a service is recommended. The error code is displayed in the top left hand corner;...
  • Page 75 Sirona Dental A/S 5 Operation DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL 5.2 Using the menu and display information DAC UNIVERSAL ADVANCED The error code is displayed in the top left hand corner; Displays when the water quality is insufficient. The water quality needs to be 3.0 μS/cm or better.
  • Page 76 Operating Instructions DAC UNIVERSAL The error code is displayed in the top left hand corner; Low water. Make sure the DAC UNIVERSAL is supplied with water from the water treatment system. For further troubleshooting, see "Display messages DAC UNIVERSAL ADVANCED [ → 140]".

  • Page 77: Menu System Dac Universal Advanced

    5.2.2.1 Menu overview DAC UNIVERSAL ADVANCED Description The DAC UNIVERSAL has a structured menu system, which has the ready screen at the top. Under the ready screen, there is a left hand menu and a right hand menu. Left hand menu...
  • Page 78 5 Operation DAC UNIVERSAL ADVANCED Sirona Dental A/S 5.2 Using the menu and display information DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL Level 1 Level 2 Level 3 Level 4 Level 5 Description Check oil in chamber Manual water operation Check water in chamber...
  • Page 79 Sirona Dental A/S 5 Operation DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL 5.2 Using the menu and display information DAC UNIVERSAL ADVANCED Level 1 Level 2 Level 3 Level 4 Level 5 Description Ambient sensitivity 0 Ambient sensitivity 1 Ambient sensitivity 2...
  • Page 80 5 Operation DAC UNIVERSAL ADVANCED Sirona Dental A/S 5.2 Using the menu and display information DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL Level 1 Level 2 Level 3 Level 4 Level 5 Description Rinse cycles 5 Rinse cycles 6 Oil expel Oil expel 1...
  • Page 81 Sirona Dental A/S 5 Operation DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL 5.2 Using the menu and display information DAC UNIVERSAL ADVANCED Level 1 Level 2 Level 3 Level 4 Level 5 Description Choose year Confirm date setting Set time 12 hour clock...
  • Page 82 5 Operation DAC UNIVERSAL ADVANCED Sirona Dental A/S 5.2 Using the menu and display information DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL Level 1 Level 2 Level 3 Level 4 Level 5 Description 100% Automatic water Automatic water ON Automatic water OFF...

  • Page 83: Navigation In The Menu Structure Dac Universal

    Menu options DAC UNIVERSAL ADVANCED The menu system is designed to offer the user a seamless interaction with the DAC UNIVERSAL. For an overview of the structure behind this interface consult the diagram in "Menu overview DAC UNIVERSAL ADVANCED [ → 77]".
  • Page 84 5 Operation DAC UNIVERSAL ADVANCED Sirona Dental A/S 5.2 Using the menu and display information DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL 5.2.2.3.1 Program selection The program selection menu enables the user to select the appropriate program. Please refer to section „Programs and program selection [ →...
  • Page 85 Manual oil operation Oil can be manually pumped to the chamber by selecting this option. This can be used to ensure that the DAC UNIVERSAL is able to lubricate the instruments correctly. Please see section „Checking oil supply to the chamber of the DAC UNIVERSAL ADVANCED [ →...
  • Page 86 5.2.2.3.3 Settings The settings section of the menu is used to alter the user changeable settings of the DAC UNIVERSAL. Some of these settings alter the way the cycles are completed. Please always be careful when altering these settings. 5.2.2.3.3.1...
  • Page 87 Sirona Dental A/S 5 Operation DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL 5.2 Using the menu and display information DAC UNIVERSAL ADVANCED 5.2.2.3.3.2 Setting ambient sensitivity Standard setting: Level 1 (low ambient temperature sensitivity). ● Level 0: ambient temperature sensitivity deactivated (For clinics with a high / normal temperature).
  • Page 88 5 Operation DAC UNIVERSAL ADVANCED Sirona Dental A/S 5.2 Using the menu and display information DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL 5.2.2.3.3.3 Printer settings The printer settings enable the user to control the printer attached to the serial port of the DAC UNIVERSAL.
  • Page 89 Sirona Dental A/S 5 Operation DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL 5.2 Using the menu and display information DAC UNIVERSAL ADVANCED 5.2.2.3.3.5 Oil expel Condensation and excess oil are purged from the instruments with air. Standard setting: Level 1. The maximum is level 5.
  • Page 90 Operating Instructions DAC UNIVERSAL 5.2.2.3.3.7 Set date The date can be set on the DAC UNIVERSAL using these settings. 1. Choose the current date using the “Left/Right”-Keys accordingly. 2. Press the “Down”-Key to confirm the selection. 60 53 362 D3472...
  • Page 91 5.2 Using the menu and display information DAC UNIVERSAL ADVANCED 5.2.2.3.3.8 Set time The time can be set on the DAC UNIVERSAL using these settings. The clock can be set as a 12 hour clock or 24 hour clock. 1. Choose the desired clock format using the “Left/Right”-Keys accordingly.
  • Page 92 2. Press the “Down”-Key to confirm the selection. 5.2.2.3.3.10 Automatic water This setting enables the DAC UNIVERSAL to automatically fill the water tank from an external water conditioning system, connected to the DAC UNIVERSAL. If such a system is connected to the autoclave: 1.
  • Page 93 Sirona Dental A/S 5 Operation DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL 5.2 Using the menu and display information DAC UNIVERSAL ADVANCED 5.2.2.3.4 History The History section persists of 3 subcategories: ● Cycles: Shows the number of cycles completed for each of the 3 programs.

  • Page 94: Standard Settings And Resetting The Menu Dac Universal

    5 Operation DAC UNIVERSAL ADVANCED Sirona Dental A/S 5.2 Using the menu and display information DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL 5.2.3 Standard settings and Resetting the menu DAC UNIVERSAL ADVANCED Standard settings Program 134°C / 273°F, Sterilization time 3 min.

  • Page 95: Symbol Definitions Dac Universal Advanced

    Sirona Dental A/S 5 Operation DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL 5.2 Using the menu and display information DAC UNIVERSAL ADVANCED 5.2.4 Symbol definitions DAC UNIVERSAL ADVANCED Refer to this list to see the definition of symbols used on the display of the DAC UNIVERSAL.
  • Page 96 5 Operation DAC UNIVERSAL ADVANCED Sirona Dental A/S 5.2 Using the menu and display information DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL Symbol Description Cycle. Progress bar. STANDARD lid STANDARD lid is selected. BASKET lid BASKET lid is selected. FLEX lid FLEX lid is selected.
  • Page 97 Sirona Dental A/S 5 Operation DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL 5.2 Using the menu and display information DAC UNIVERSAL ADVANCED Symbol Description 200 Cycles. Press the “Right”-Key to approve and continue. Warning service needed Error message 60 53 362 D3472...

  • Page 98: Reprocessing With The Dac Universal Advanced

    Unless the DAC UNIVERSAL was put into standby mode before having been disconnected from the power socket. In this case the DAC UNIVERSAL will restart in standby mode and will therefore have to be taken out of this by pressing the "Start/Stop"-Key.

  • Page 99: Reprocessing With The Standard Lid Dac Universal

    NOTICE Instruments are damaged by inadequate lubrication. IMPORTANT If the DAC UNIVERSAL is started with fewer than 6 instruments placed in the lid, the lubrication function is not deactivated at the empty positions. To prevent oily instruments, we recommend placing instruments in all 6 positions of the lid.

  • Page 100: Start Cycle On The Standard Lid Dac Universal

    WARNING The instruments may not be wrapped when using the STANDARD lid, as cleaning, lubrication, and sterilization would then fail. IMPORTANT Do not start the DAC UNIVERSAL without a lid inserted into the lid holder. Process ✔ All settings of the DAC UNIVERSAL were preset according to "Regular activities [ →...
  • Page 101 "Checking the reprocessing result with an indicator / PCD test device [ → 59]" for more information on using the chemical indicator / PCD test device. 5. Insert the STANDARD lid in the cover holder of the DAC UNIVERSAL in such a way that the instruments are pointing down. NOTICE Make sure that the lid is inserted all the way into the holder so that the instrument heads do not touch the wall of the chamber.
  • Page 102  The cycle number is shown next to the completed cycle symbol. CAUTION Danger of burning! Never hold your head directly over the DAC UNIVERSAL or touch the inserted lid, while the DAC UNIVERSAL opens, as steam comes out of the unit upon completion of a cycle.
  • Page 103 Operating Instructions DAC UNIVERSAL 5.3 Reprocessing with the DAC UNIVERSAL ADVANCED 14. Remove the STANDARD lid from the holder on the DAC UNIVERSAL at the end of the cycle to allow the instruments to cool down faster. 15. Place the STANDARD lid on the counter or put it in the optional lid holder.

  • Page 104: Advanced

    The instruments may not be wrapped when using the BASKET lid, as cleaning and sterilization would then fail. IMPORTANT Do not start the DAC UNIVERSAL without a lid inserted into the lid holder. ✔ All settings of the DAC UNIVERSAL were preset according to "Regular activities [ →...
  • Page 105 5 Operation DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL 5.3 Reprocessing with the DAC UNIVERSAL ADVANCED 3. Open the snap lock on the basket and take the small lid off the basket. 4. Put maximum 5 solid instruments into the basket, if possible with the sharp tip down.
  • Page 106 Place a NitraClean tablet in the empty chamber. See "NitraClean cleaning tablet [ → 241]" for more information on using a NitraClean tablet. 8. Insert the BASKET lid in the cover holder of the DAC UNIVERSAL in such a way that the basket points down. NOTICE Make sure that the lid is inserted all the way into the holder so that the basket does not touch the wall of the chamber.
  • Page 107 20 seconds, you must choose the lid and press the "Start/Stop"-Key again.  The BASKET lid of the DAC UNIVERSAL closes as soon as the safety ring is pressed.  The DAC UNIVERSAL automatically runs the cleaning and sterilization cycle.
  • Page 108 Please touch only the plastic part of the BASKET lid at the end of the cycle. 18. Remove the BASKET lid from the holder on the DAC UNIVERSAL at the end of the cycle to allow the instruments to cool down faster.
  • Page 109 5 Operation DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL 5.3 Reprocessing with the DAC UNIVERSAL ADVANCED must be conducted in the DAC UNIVERSAL or a class B sterilizer (e.g. DAC PROFESSIONAL). For sterilizing wrapped instruments in DAC UNIVERSAL, see "Reprocessing with the WRAPPED lid DAC UNIVERSAL ADVANCED [ →...

  • Page 110: Reprocessing With The Wrapped Lid Dac Universal

    5 Operation DAC UNIVERSAL ADVANCED Sirona Dental A/S 5.3 Reprocessing with the DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL 5.3.4 Reprocessing with the WRAPPED lid DAC UNIVERSAL ADVANCED The WRAPPED lid is used for reprocessing wrapped rotating handpieces and wrapped solid instruments. IMPORTANT WRAPPED lid not for FLEX lid instruments The WRAPPED lid can not be used for the FLEX lid instruments.
  • Page 111 UNIVERSAL ADVANCED [ → 99]" or "Reprocessing with the BASKET lid DAC UNIVERSAL ADVANCED [ → 104]". IMPORTANT Do not start the DAC UNIVERSAL without a lid inserted into the lid holder. ✔ All settings of the DAC UNIVERSAL were preset according to "Regular activities [ →...
  • Page 112 6. Insert the WRAPPED lid in the cover holder of the DAC UNIVERSAL. NOTICE Make sure that the lid is inserted all the way into the holder and the wrapped instruments do not touch the wall of the chamber.
  • Page 113  The cycle number is shown next to the completed cycle symbol. CAUTION Danger of burning! Never hold your head directly over the DAC UNIVERSAL or touch the inserted lid, while the DAC UNIVERSAL opens, as steam comes out of the unit upon completion of a cycle.
  • Page 114 5 Operation DAC UNIVERSAL ADVANCED Sirona Dental A/S 5.3 Reprocessing with the DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL 17. Check whether the dark status bar of the chemical indicator is in the "ACCEPT" range.  If everything is correct, reprocessing was successful.

  • Page 115: Advanced

    5 Operation DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL 5.3 Reprocessing with the DAC UNIVERSAL ADVANCED 5.3.5 Reprocessing with the FLEX lid DAC UNIVERSAL ADVANCED The FLEX lid is used to clean and thermally disinfect ultrasonic scaler handpieces, scaler tips, airflow nozzles and sprayvit nozzles.
  • Page 116 5 Operation DAC UNIVERSAL ADVANCED Sirona Dental A/S 5.3 Reprocessing with the DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL General attachment of scaling tips WARNING Scaler tips must be inserted with the associated torque wrench. The torque wrench should remain on the tip during the whole process.

  • Page 117: Start Cycle On The Flex Lid Dac Universal

    / PCD test device [ → 59]" for more information on using the chemical indicator / PCD test device. 5. Insert the FLEX lid in the cover holder of the DAC UNIVERSAL in such a way that the instruments are pointing down.
  • Page 118 20 seconds, you must choose the lid and press the "Start/Stop"-Key again  The FLEX lid of the DAC UNIVERSAL closes as soon as the safety ring is pressed.  The DAC UNIVERSAL automatically runs the cleaning and high- level disinfection cycle.
  • Page 119 The metal part of the lid is very hot. Please touch only the plastic part of the FLEX lid at the end of the cycle. 15. Remove the FLEX lid from the holder on the DAC UNIVERSAL at the end of the cycle to allow the instruments to cool down faster.
  • Page 120 5 Operation DAC UNIVERSAL ADVANCED Sirona Dental A/S 5.3 Reprocessing with the DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL 22. Remove every instrument from the FLEX lid. See "Attaching instruments to the respective STANDARD lid adapters [ → 220]" for detailed instructions on removing the individual instruments.

  • Page 121: Cleaning And Maintanance Dac Universal Advanced

    Cleaning and maintanance DAC UNIVERSAL ADVANCED After every 50 cycles, the DAC UNIVERSAL will give a 2-second acoustic alarm and the display will indicate as shown on the left. This message reminds the user that the weekly cleaning/maintenance according to the Check &...

  • Page 122: Checking Oil Supply To The Chamber Of The Dac Universal Advanced

    Checking water supply to the chamber of the DAC UNIVERSAL ADVANCED Frequency: weekly or every 50 cycles (whichever comes first). In order to make sure that the DAC UNIVERSAL is able to bring water to the chamber correctly, this operation needs to be tested. ✔...

  • Page 123: Checking Water Supply To The Lids Of The Dac Universal Advanced

    UNIVERSAL ADVANCED Frequency: weekly or every 50 cycles (whichever comes first). In order to make sure that the DAC UNIVERSAL is able to bring water to Checking water supply_with FLEX lid the chamber and internal channels of the STANDARD & FLEX lids correctly, this operation needs to be tested.

  • Page 124: Checking Oil Supply To The Standard Lid Of The Dac Universal

    DAC UNIVERSAL ADVANCED Frequency: weekly or every 50 cycles (whichever comes first). In order to make sure that the DAC UNIVERSAL is able to lubricate the instruments correctly, the flow through the internal oil channels of the STANDARD lid needs to be tested.

  • Page 125: Drain The Water Tank Of The Dac Universal Advanced

    The DAC UNIVERSAL is switched on and ready for operation. ✔ The water supply is disconnected (for a permanent water supply). ✔ The STANDARD lid of the DAC UNIVERSAL is removed and there is an unobstructed view into the chamber. 60 53 362 D3472 D3472.201.10.20.02 07.2016...

  • Page 126: Drain The Water Tank Via A Hose

    Steps 1-3 are required only if there is a permanent water connection. 1. Switch off the water of your water conditioning system. 2. Open the "Water" quick coupling at the back of the DAC UNIVERSAL unit by twisting it counterclockwise.
  • Page 127 5. Place the end of the hose in a sink or bucket. IMPORTANT The DAC UNIVERSAL must be placed higher than the sink/bucket to allow the water to drain out.  The hose for draining the water tank is installed.

  • Page 128: Cleaning The Water Tank

    1. Remove the sieve from the water tank 2. Grasp the recesses of water tank with both hands. 3. Wriggle the water tank carefully until it comes loose. 4. Lift the water tank straight out of the DAC UNIVERSAL. 60 53 362 D3472 D3472.201.10.20.02 07.2016...
  • Page 129 Sirona Dental A/S 6 Cleaning and maintanance DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL 6.6 Cleaning the water tank 5. Clean the water tank with warm water (maximum 50ºC / 122ºF). 6. Clean the filter with warm water (maximum 50ºC / 122ºF).

  • Page 130: Cleaning The Drain Filter

    14. For manual water supply: Fill demineralized or distilled water (water conductivity < 3.0 µS/cm) into the water tank. 15. Reconnect the DAC UNIVERSAL to the power supply.  The DAC UNIVERSAL is now switched on and ready for operation again. Cleaning the drain filter Frequency: weekly or every 50 cycles (whichever comes first).

  • Page 131: Remove And Clean The Drain Tank

    If using automatic water: Daily or every 50 cycles (whichever comes first) or when it is full. NOTICE Do not start a cycle if the DAC UNIVERSAL is not connected to the drain tank or drainage system. ✔ The DAC UNIVERSAL is switched off and cooled down.
  • Page 132 6 Cleaning and maintanance DAC UNIVERSAL ADVANCED Sirona Dental A/S 6.8 Remove and clean the drain tank Operating Instructions DAC UNIVERSAL 1. Unscrew the lid of the drain tank. 2. Remove the condensation tube. 3. Empty the waste water tank. Dispose of the waste water according to the national guidelines and the applicable regulations for waste disposal.

  • Page 133: Checking The Adapters And The Respective O-Rings

    This prevent the growth of bacteria in the drain tank. 8. Replace the condensation tube and screw the lid on firmly. 9. Place the drain tank no more than 3 m from the DAC UNIVERSAL and at a lower height.

  • Page 134: Cleaning The Empty Chamber Of The Dac Universal Advanced

    ✔ The DAC UNIVERSAL is switched on and ready for operation. ✔ The STANDARD lid of the DAC UNIVERSAL is removed and there is an unobstructed view into the chamber. ✔ There is no water or oil in the chamber or the hoses.
  • Page 135 20 seconds, you must choose the lid and press the "Start/Stop"-Key again.  The STANDARD lid of the DAC UNIVERSAL closes as soon as the safety ring is pressed.  The DAC UNIVERSAL automatically runs the cleaning and sterilization cycle.

  • Page 136: Cleaning The Housing Of The Unit

    The metal part of the lid is very hot. Please touch only the plastic part of the lid at the end of the cycle. 11. Remove the STANDARD lid from the holder on the DAC UNIVERSAL at the end of the cycle.

  • Page 137: Checking The Safety Ring Of The Dac Universal Advanced

    Checking the safety ring of the DAC UNIVERSAL ADVANCED Frequency: every 4 weeks or every 200 cycles (whichever comes first). ✔ The DAC UNIVERSAL is switched on and ready for operation. 1. Insert the STANDARD lid in the cover holder of the DAC UNIVERSAL. NOTICE No instruments may be on the STANDARD lid.

  • Page 138: Changing The Drain Filter

     The lid moves up again for 5 seconds, message 86 appears on the display, and an acoustic signal sounds. 9. Press the "Up"-Key until the ready screen reappears.  The lid holder of the DAC UNIVERSAL moves up completely. CAUTION If the check does not proceed as described above, the DAC UNIVERSAL may not continue to be used.

  • Page 139: Changing The O-Rings On The Adapters

    Frequency: every 2nd year or every 3000 cycles (whichever comes first). When 2 years has passed or 3000 cycles, since the last service or the DAC UNIVERSAL was put into use for the first time, the screen "Service needed" will be displayed, simultaneously with a 2 second acoustic alarm.

  • Page 140: Display Messages Dac Universal Advanced

    CAUTION Danger of burning! Hot steam may emerge from the chamber. ➢ Please do not open the DAC UNIVERSAL when the temperature is still above 104°C (219°F), see display indicator. IMPORTANT If the DAC UNIVERSAL shows the same display message more than once, and this is not due to lack of consumables, please contact your authorized dealer.
  • Page 141 Sirona Dental A/S 7 Display messages DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL IMPORTANT If a display message is displayed during sterilization, it is shown again when the lid opens. To delete this display message and start a new cycle, you must press the "Up"-Key and the "Right"-Key simultaneously.

  • Page 142: Display Messages And What They Mean Dac Universal Advanced

    (water conductivity < 3.0 µS/cm) into minutes. the water tank. If the DAC UNIVERSAL is in a room with a temperature < 16°C / 61°F, ensure that operating conditions is fullfilled. Press the "Up" and "Right"-Keys simultaneously to reset and then restart the DAC UNIVERSAL.
  • Page 143 Sirona Dental A/S 7 Display messages DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL 7.1 Display messages and what they mean DAC UNIVERSAL ADVANCED Code Pictogram Description Corrective action The safety system was Please contact your authorized dealer. activated. The safety system is Please contact your authorized dealer.
  • Page 144 7 Display messages DAC UNIVERSAL ADVANCED Sirona Dental A/S 7.1 Display messages and what they mean DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL Code Pictogram Description Corrective action The pressure in the Drain water from the chamber. chamber does not drop Clean or change the drain filter, see "Cleaning the quickly enough after the drain filter [ →...
  • Page 145 (water conductivity < 3.0 µS/cm) into within 2.5 minutes. the water tank. If the DAC UNIVERSAL is in a room with a temperature < 16°C / 61°F, ensure that operating conditions is fullfilled. Press the "Up" and "Right"-Keys simultaneously to reset and then restart the DAC UNIVERSAL.
  • Page 146 7 Display messages DAC UNIVERSAL ADVANCED Sirona Dental A/S 7.1 Display messages and what they mean DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL Code Pictogram Description Corrective action Valve error Please contact your authorized dealer. Valve error Please contact your authorized dealer.
  • Page 147 Sirona Dental A/S 7 Display messages DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL 7.1 Display messages and what they mean DAC UNIVERSAL ADVANCED Code Pictogram Description Corrective action The sterilization If the water level is too low, fill demineralized or temperature was not distilled water (water conductivity <...
  • Page 148 7 Display messages DAC UNIVERSAL ADVANCED Sirona Dental A/S 7.1 Display messages and what they mean DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL Code Pictogram Description Corrective action Too little pressure during Make sure your compressor is switched on. the pressure test.
  • Page 149 If error 95 was caused by a leak, there will be a large pool of water on the counter under the DAC UNIVERSAL. Check for water under the DAC UNIVERSAL. If this is the case, interrupt the water supply to the DAC UNIVERSAL and please contact your authorized dealer.
  • Page 150 7 Display messages DAC UNIVERSAL ADVANCED Sirona Dental A/S 7.1 Display messages and what they mean DAC UNIVERSAL ADVANCED Operating Instructions DAC UNIVERSAL Code Pictogram Description Corrective action The lid will not close. Press the "Up"-Key to reset and wait until the lid is in its highest position.

  • Page 151: Errors Without A Message

    Sterilization OFF safety ring! (A long Your DAC UNIVERSAL technician has run a special program. acoustic alarm will be given Disconnect the plug of the DAC UNIVERSAL and reconnect it to the power simultaneously). supply. WARNING: Otherwise no sterilization will take place! The DAC UNIVERSAL does not open.

  • Page 152: Reset Dac Universal Advanced

    If the error occurs repeatedly, please contact your authorized dealer. The DAC UNIVERSAL does not heat up. If the safety system was activated and the DAC UNIVERSAL does not open, please reset, see "Reset DAC UNIVERSAL ADVANCED [ → 152]".

  • Page 153: Operation Dac Universal Standard

    8.1 Regular activities Operation DAC UNIVERSAL STANDARD Regular activities The DAC UNIVERSAL was installed by a service technician according to Introduction regular activities the instructions in the "Installation [ → 49]" section. See below for an overview of the activities that must be conducted during the regular use of the DAC UNIVERSAL.

  • Page 154: Testing With A Chemical Indicator

    Use a commercial chemical indicator (Class 6), e.g. gke Steri-Record C- S-P-6-SV2 for the prion program. IMPORTANT All chemical indicators used in the DAC UNIVERSAL must be coated or non-paper chemical indicators. IMPORTANT Follow the manufacturer's instructions for use when using a chemical indicator.
  • Page 155 If the chemical indicator indicates that the test was not passed, do not use the instruments that were reprocessed after the time of the last successful check. Do not continue to use the DAC UNIVERSAL. Please contact your authorized dealer. 8.1.2.1.1 Using a chemical indicator with the STANDARD lid 1.
  • Page 156 8 Operation DAC UNIVERSAL STANDARD Sirona Dental A/S 8.1 Regular activities Operating Instructions DAC UNIVERSAL 2. Attach the STANDARD indicator holder in the groove on the center post of the STANDARD lid. 3. Start a cycle. See "Reprocessing with the STANDARD lid DAC UNIVERSAL STANDARD [ →...
  • Page 157 2. Attach the FLEX indicator holder in the groove on the center post of the FLEX lid. 3. Start a cycle. See "Reprocessing with the FLEX lid DAC UNIVERSAL STANDARD [ → 187]" for the detailed procedure. 4. After the end of the cycle, check that the chemical indicator indicates the disinfection test was passed.

  • Page 158: Testing With A Pcd Process Challenge Device

    An ISO/INTRAmatic adapter is needed to mount a PCD test device to the STANDARD lid. Process ✔ The DAC UNIVERSAL is switched on and ready for a cycle. ✔ Up to 5 instruments are in the DAC UNIVERSAL ready for reprocessing, see "Pre- and post-reprocessing of instruments [ →...
  • Page 159 Sirona Dental A/S 8 Operation DAC UNIVERSAL STANDARD Operating Instructions DAC UNIVERSAL 8.1 Regular activities 7. Press the PCD test device onto the ISO/ INTRAmatic adapter until you hear and feel a slight click. 8. Put instruments into the other 5 adapters as usual.

  • Page 160: Testing With A Protein Residue Test

    Use only NitramOil #2 for the DAC UNIVERSAL. IMPORTANT In case of fire: There is maximum 200 ml / 0.043 imperial gallons of oil in the DAC UNIVERSAL. There is no danger that dangerous or harmful gases can develop in case of fire. 60 53 362 D3472...
  • Page 161 (next to the water tank). 4. Turn the oil bottle carefully clockwise until you meet resistance. 5. Close the lid of the water tank.  The oil bottle is now inserted in the DAC UNIVERSAL. 60 53 362 D3472 D3472.201.10.20.02 07.2016...

  • Page 162: Pumping Lubrication Concentrate Through The System

     The oil bottle has been replaced. Tip: You can also remove a partially used oil bottle that is not yet empty from the DAC UNIVERSAL and insert it again at a later time. 8.1.4 Pumping lubrication concentrate through the system When a new bottle of lubrication concentrate has been inserted, you must check whether oil is pumped into the chamber.

  • Page 163: Filling The Water Tank

    8.1.6 Pumping water through the system Before the DAC UNIVERSAL can be started, you must check whether water flows into the chamber. See "Checking water supply to the lids of the DAC UNIVERSAL STANDARD [ →...

  • Page 164: Using The Menu And Display Information Dac Universal Standard

    8 Operation DAC UNIVERSAL STANDARD Sirona Dental A/S 8.2 Using the menu and display information DAC UNIVERSAL STANDARD Operating Instructions DAC UNIVERSAL Using the menu and display information DAC UNIVERSAL STANDARD 8.2.1 Display information DAC UNIVERSAL STANDARD The display indicates the current status of the system as follows:...

  • Page 165: Menu System Dac Universal Standard

    (simultaneously 2 seconds of acoustic alarm is given) Check & Clean Displayed after 50 cycles. Indicates that cleaning and servicing are due according to the Check & Clean schedule. See "Cleaning and maintenance DAC UNIVERSAL STANDARD [ → 192]" for details. 8.2.2 Menu system DAC UNIVERSAL STANDARD 8.2.2.1...

  • Page 166: Menu Overview Dac Universal Standard

    8 Operation DAC UNIVERSAL STANDARD Sirona Dental A/S 8.2 Using the menu and display information DAC UNIVERSAL STANDARD Operating Instructions DAC UNIVERSAL 8.2.2.2 Menu overview DAC UNIVERSAL STANDARD Menu level 1 Menu level 2 Menu level 3 Result / Activity / Note Menu overview with FLEX lid "Program"...
  • Page 167 Sirona Dental A/S 8 Operation DAC UNIVERSAL STANDARD Operating Instructions DAC UNIVERSAL 8.2 Using the menu and display information DAC UNIVERSAL STANDARD Menu level 1 Menu level 2 Menu level 3 Result / Activity / Note "Settings" "Expel" 0 - 3 Purging Purge instruments with air after sterilization.
  • Page 168 8 Operation DAC UNIVERSAL STANDARD Sirona Dental A/S 8.2 Using the menu and display information DAC UNIVERSAL STANDARD Operating Instructions DAC UNIVERSAL Menu level 1 Menu level 2 Menu level 3 Result / Activity / Note "Settings" "Automatic "ON " Automatic filling of the water tank by a water conditioning water"...

  • Page 169: Standard Settings And Resetting The Menu System Dac

    Sirona Dental A/S 8 Operation DAC UNIVERSAL STANDARD Operating Instructions DAC UNIVERSAL 8.2 Using the menu and display information DAC UNIVERSAL STANDARD 8.2.3 Standard settings and Resetting the menu system DAC UNIVERSAL STANDARD Standard settings Program 134°C / 273°F, Sterilization time 3 min.
  • Page 170 1. Press the "Rinse/Flush"-Key.  The blue LED lamp next to the "Rinse/Flush"-Key goes out.  Interior/exterior washing is deactivated. 2. Start the DAC UNIVERSAL as usual by pressing the "Start"-Key. NOTICE When cleaning is omitted, successful sterilization is no longer ensured.

  • Page 171: Reprocessing With Dac Universal Standard

    Switching ON/OFF/Standby mode DAC UNIVERSAL STANDARD Switch-on The DAC UNIVERSAL will power up and heat the steam generator once the DAC UNIVERSAL is connected to a power socket. Unless the DAC UNIVERSAL was put into standby mode before having been disconnected from the power socket. In this case the DAC UNIVERSAL will restart in standby mode and will therefore have to be taken out of this by pressing the "Start"-Key.

  • Page 172: Reprocessing With The Standard Lid Dac Universal

    NOTICE Instruments are damaged by inadequate lubrication. IMPORTANT If the DAC UNIVERSAL is started with fewer than 6 instruments placed in the lid, the lubrication function is not deactivated at the empty positions. To prevent oily instruments, we recommend placing instruments in all 6 positions of the lid.
  • Page 173 Sirona Dental A/S 8 Operation DAC UNIVERSAL STANDARD Operating Instructions DAC UNIVERSAL 8.3 Reprocessing with DAC UNIVERSAL STANDARD General attachment Place the instruments on their respective adapters of the STANDARD lid. Depending on the instrument and the kind of adapter, you must press or click the instrument onto the adapter, activate a snap lock on the adapter, or tighten a threaded ring on the instrument.

  • Page 174: Start Cycle On The Standard Lid Dac Universal

    The instruments may not be wrapped when using the STANDARD lid, as cleaning, lubrication, and sterilization would then fail. IMPORTANT Do not start the DAC UNIVERSAL without a lid inserted into the lid holder. ✔ All settings of the DAC UNIVERSAL were preset according to "Regular activities [ →...
  • Page 175 "Ready 121 °C" appear on the display: "Ready 134 °C 18min"  On the DAC UNIVERSAL, 2 LEDs light up at the left of the respective "Rinse/Flush"-Key and the "Lubricate"-Key. IMPORTANT If no program is selected, the standard program for reprocessing is used.
  • Page 176 The metal part of the lid is very hot. Please touch only the plastic part of the STANDARD lid at the end of the cycle. 14. Remove the STANDARD lid from the holder on the DAC UNIVERSAL at the end of the cycle to allow the instruments to cool down faster.

  • Page 177: Reprocessing With The Basket Lid Dac Universal Standard

    The instruments may not be wrapped when using the BASKET lid, as cleaning and sterilization would then fail. IMPORTANT Do not start the DAC UNIVERSAL without a lid inserted into the lid holder. ✔ All settings of the DAC UNIVERSAL were preset according to "Regular activities [ →...
  • Page 178 8 Operation DAC UNIVERSAL STANDARD Sirona Dental A/S 8.3 Reprocessing with DAC UNIVERSAL STANDARD Operating Instructions DAC UNIVERSAL 3. Open the snap lock on the basket and take the small lid off the basket. 4. Put maximum 5 solid instruments into the basket, if possible with the sharp tip down.
  • Page 179 Place a NitraClean tablet in the empty chamber. See "NitraClean cleaning tablet [ → 241]" for more information on using a NitraClean tablet. 8. Insert the BASKET lid in the cover holder of the DAC UNIVERSAL in such a way that the basket points down. NOTICE Make sure that the lid is inserted all the way into the holder so that the basket does not touch the wall of the chamber.
  • Page 180 13. Select the BASKET lid using the arrows keys 14. Press the „Start“-Key twice.  On the DAC UNIVERSAL, only the LED at the left of the "Rinse/ Flush"-Key is on.  Depending on the program selected, a prompt to press down on the safety ring may appear on the display.
  • Page 181 Please touch only the plastic part of the BASKET lid at the end of the cycle. 17. Remove the BASKET lid from the holder on the DAC UNIVERSAL at the end of the cycle to allow the instruments to cool down faster.

  • Page 182: Reprocessing With The Wrapped Lid Dac Universal

    8 Operation DAC UNIVERSAL STANDARD Sirona Dental A/S 8.3 Reprocessing with DAC UNIVERSAL STANDARD Operating Instructions DAC UNIVERSAL 8.3.4 Reprocessing with the WRAPPED lid DAC UNIVERSAL STANDARD The WRAPPED lid is used for reprocessing wrapped rotating handpieces and wrapped solid instruments. IMPORTANT WRAPPED lid not for FLEX lid instruments The WRAPPED lid can not be used for the FLEX lid instruments.
  • Page 183 UNIVERSAL STANDARD [ → 172]" or "Reprocessing with the BASKET lid DAC UNIVERSAL STANDARD [ → 177]". IMPORTANT Do not start the DAC UNIVERSAL without a lid inserted into the lid holder. ✔ All settings of the DAC UNIVERSAL were preset according to "Regular activities [ →...
  • Page 184 6. Insert the WRAPPED lid in the cover holder of the DAC UNIVERSAL. NOTICE Make sure that the lid is inserted all the way into the holder and the wrapped instruments do not touch the wall of the chamber.
  • Page 185 8.3 Reprocessing with DAC UNIVERSAL STANDARD CAUTION Danger of burning! Never hold your head directly over the DAC UNIVERSAL or touch the inserted lid, while the DAC UNIVERSAL opens, as steam comes out of the unit upon completion of a cycle.
  • Page 186 Operating Instructions DAC UNIVERSAL  The instruments can now be used again. They can also be stored for later use.  After the end of the cycle, the DAC UNIVERSAL automatically reactivates cleaning and lubrication for the next cycle. 60 53 362 D3472...

  • Page 187: Reprocessing With The Flex Lid Dac Universal Standard

    8 Operation DAC UNIVERSAL STANDARD Operating Instructions DAC UNIVERSAL 8.3 Reprocessing with DAC UNIVERSAL STANDARD 8.3.5 Reprocessing with the FLEX lid DAC UNIVERSAL STANDARD The FLEX lid is used to clean and thermally disinfect ultrasonic scaler handpieces, scaler tips, airflow nozzles and sprayvit nozzles.

  • Page 188: Start Cycle On The Flex Lid Dac Universal

    The instruments may not be wrapped when using the FLEX lid, as cleaning and disinfection would then fail. IMPORTANT Do not start the DAC UNIVERSAL without a lid inserted into the lid holder. ✔ All settings of the DAC UNIVERSAL were preset according to "Regular activities [ →...
  • Page 189 8 Operation DAC UNIVERSAL STANDARD Operating Instructions DAC UNIVERSAL 8.3 Reprocessing with DAC UNIVERSAL STANDARD 5. Insert the FLEX lid in the cover holder of the DAC UNIVERSAL in such a way that the instruments are pointing down. NOTICE Make sure that the lid is inserted all the way into the holder so that the instrument heads do not touch the wall of the chamber.
  • Page 190 The metal part of the lid is very hot. Please touch only the plastic part of the FLEX lid at the end of the cycle. 14. Remove the FLEX lid from the holder on the DAC UNIVERSAL at the end of the cycle to allow the instruments to cool down faster.
  • Page 191 Instruments must be wrapped and a sterilization must be conducted in a class B sterilizer (e.g. DAC PROFESSIONAL).  After the end of the cycle, the DAC UNIVERSAL automatically reactivates lubrication for the next cycle. 60 53 362 D3472...

  • Page 192: Cleaning And Maintenance Dac Universal Standard

    " - Check & Clean. This message reminds the user that the weekly cleaning/maintenance according to the Check & Clean (C&C) is due. The Check & Clean is included with the DAC UNIVERSAL. The table below shows how often cleaning/maintenance should be carried out.

  • Page 193: Checking Oil Supply To The Chamber Of The Dac Universal Standard

    UNIVERSAL STANDARD Frequency: weekly or every 50 cycles (whichever comes first). In order to make sure that the DAC UNIVERSAL is able to bring water to the chamber correctly, this operation needs to be tested. Pump water into the chamber ✔...

  • Page 194: Checking Water Supply To The Lids Of The Dac Universal Standard

    UNIVERSAL STANDARD Frequency: weekly or every 50 cycles (whichever comes first). In order to make sure that the DAC UNIVERSAL is able to bring water to Checking water supply_with FLEX lid the chamber and internal channels of the STANDARD & FLEX lids correctly, this operation needs to be tested.

  • Page 195: Checking Oil Supply To The Standard Lid Of The Dac Universal

    DAC UNIVERSAL STANDARD Frequency: weekly or every 50 cycles (whichever comes first). In order to make sure that the DAC UNIVERSAL is able to lubricate the instruments correctly, the flow through the internal oil channels of the STANDARD lid needs to be tested.

  • Page 196: Drain The Water Tank Of The Dac Universal Standard

    ✔ The water supply is disconnected (for a permanent water supply). ✔ The STANDARD lid of the DAC UNIVERSAL is removed and there is an unobstructed view into the chamber. 1. Press the "Menu/Enter"-Key to go to menu level 1.

  • Page 197: Drain The Water Tank Via A Hose

    Steps 1-3 are required only if there is a permanent water connection. 1. Switch off the water of your water conditioning system. 2. Open the "Water" quick coupling at the back of the DAC UNIVERSAL unit by twisting it counterclockwise.

  • Page 198: Cleaning The Water Tank

    16. Reattach the normal 6/4-mm hose to the "Water" quick coupling at the back of the unit and twist it clockwise firmly. IMPORTANT If you have installed the DAC UNIVERSAL with a permanent water connection, please remember to turn the water back on. IMPORTANT If there is no permanent water connection, fill the water tank with demineralized or distilled water (water conductivity <...
  • Page 199 2. Grasp the recesses of water tank with both hands. 3. Wriggle the water tank carefully until it comes loose. 4. Lift the water tank straight out of the DAC UNIVERSAL. 5. Clean the water tank with warm water (maximum 50ºC / 122ºF).
  • Page 200 14. For manual water supply: Fill demineralized or distilled water (water conductivity < 3.0 µS/cm) into the water tank. 15. Reconnect the DAC UNIVERSAL to the power supply.  The DAC UNIVERSAL is now switched on and ready for operation again. 60 53 362 D3472...

  • Page 201: Cleaning The Drain Filter

    At approx. 10 cycles per day, the drain filter must be changed every 4 weeks, see "Changing the drain filter [ → 209]" ✔ The DAC UNIVERSAL is switched off and cooled down. ✔ You are wearing your protective gear.

  • Page 202: Remove And Clean The Drain Tank

    If using automatic water: Daily or every 50 cycles (whichever comes first) or when it is full. NOTICE Do not start a cycle if the DAC UNIVERSAL is not connected to the drain tank or drainage system. ✔ The DAC UNIVERSAL is switched off and cooled down.
  • Page 203 Sirona Dental A/S 9 Cleaning and maintenance DAC UNIVERSAL STANDARD Operating Instructions DAC UNIVERSAL 9.8 Remove and clean the drain tank 2. Remove the condensation tube. 3. Empty the waste water tank. Dispose of the waste water according to the national guidelines and the applicable regulations for waste disposal.

  • Page 204: Checking The Adapters And The Respective O-Rings

    This prevent the growth of bacteria in the drain tank. 8. Replace the condensation tube and screw the lid on firmly. 9. Place the drain tank no more than 3 m from the DAC UNIVERSAL and at a lower height.

  • Page 205: Cleaning The Empty Chamber Of The Dac Universal Standard

    ✔ The DAC UNIVERSAL is switched on and ready for operation. ✔ The STANDARD lid of the DAC UNIVERSAL is removed and there is an unobstructed view into the chamber. ✔ There is no water or oil in the chamber or the hoses.
  • Page 206 20 seconds, you must choose the lid and press the "Start"-Key again.  The STANDARD lid of the DAC UNIVERSAL closes as soon as the safety ring is pressed.  The DAC UNIVERSAL automatically runs the cleaning and sterilization cycle.

  • Page 207: Cleaning The Housing Of The Unit

    Frequency: weekly or every 50 cycles (whichever comes first). ✔ The DAC UNIVERSAL is switched off and cooled down. ➢ The DAC UNIVERSAL is switched off and cooled down. IMPORTANT The surface may not be cleaned with agents containing chlorine.

  • Page 208: Checking The Safety Ring Of The Dac Universal Standard

    The DAC UNIVERSAL is switched on and ready for operation. ✔ The STANDARD lid of the DAC UNIVERSAL is removed and there is an unobstructed view into the chamber. 1. Insert the STANDARD lid in the cover holder of the DAC UNIVERSAL.

  • Page 209: Changing The Drain Filter

    IMPORTANT The drain filter should be cleaned weekly or every 50 cycles, see "Cleaning the drain filter [ → 201]". ✔ The DAC UNIVERSAL is switched off and cooled down. ✔ You are wearing your protective gear. ✔ The filter key included with the unit is at hand.

  • Page 210: Changing The O-Rings On The Adapters

    Frequency: every 2nd year or every 3000 cycles (whichever comes first). When 2 years has passed or 3000 cycles, since the last service or the DAC UNIVERSAL was put into use for the first time, the screen "Service needed" will be displayed, simultaneously with a 2 second acoustic alarm.

  • Page 211: Display Messages Dac Universal Standard

    CAUTION Danger of burning! Hot steam may emerge from the chamber. ➢ Please do not open the DAC UNIVERSAL when the temperature is still above 104°C (219°F), see display indicator. IMPORTANT If the DAC UNIVERSAL shows the same display message more than once, and this is not due to lack of consumables, please contact your authorized dealer.

  • Page 212: Display Messages And What They Mean Dac Universal Standard

    < 3.0 µS/cm) into the water tank. within 7½ minutes. If the DAC UNIVERSAL is in a room with a temperature < 16°C / 61°F, ensure that operating conditions is fullfilled. Press the "Clear"-Key to reset and then restart the DAC UNIVERSAL.
  • Page 213 < 3.0 µS/cm) into the water tank. minutes. If the DAC UNIVERSAL is in a room with a temperature < 16°C / 61°F, ensure that operating conditions is fullfilled. Press the "Clear"-Key to reset and then restart the DAC UNIVERSAL.
  • Page 214 If error 95 was caused by a leak, there will be a large pool of water on the counter under the DAC UNIVERSAL. Check for water under the DAC UNIVERSAL. If this is the case, interrupt the water supply to the DAC UNIVERSAL and please contact your authorized dealer.
  • Page 215 Please contact your authorized dealer. purging of instruments. No water during external Press the "Clear"-Key to reset and then restart the DAC UNIVERSAL. cleaning. If the water level is too low, fill demineralized or distilled water (water conductivity < 3.0 µS/cm) into the water tank.

  • Page 216: Errors Without A Message

    Sterilization OFF safety ring! (A long Your DAC UNIVERSAL technician has run a special program. acoustic alarm will be given Disconnect the plug of the DAC UNIVERSAL and reconnect it to the power simultaneously). supply. WARNING: Otherwise no sterilization will take place! The DAC UNIVERSAL does not open.

  • Page 217: Reset Dac Universal Standard

    If the error occurs repeatedly, please contact your authorized dealer. The DAC UNIVERSAL does not heat up. If the safety system was activated and the DAC UNIVERSAL does not open, please reset, see "Reset DAC UNIVERSAL STANDARD [ → 217]".

  • Page 218: Accessories

    Holder for lid 6312214 Water filter (20µm) 6078575 Air filter (20µm) 6051770 DAC UNIVERSAL thermal printer 6123462 DAC UNIVERSAL thermal printer paper, (5 rolls) 6051820 PCD test device 6051788 STANDARD indicator holder 6542489 FLEX indicator holder 6078526 Drain tank with hose...

  • Page 219: Adapters For The Standard Lid

    6051804 Adapter for NSK PTL 6051812 Adapter for NSK QDJ 6085745 Adapter for Osada OFJ 6051697 Adapter for Sirona quick coupling R/F/B 6051671 Adapter for W&H Roto Quick 6323831 Adapter for Yoshida QUICK JOINT Straight and contra-angle handpiece adapters 6051648...

  • Page 220: Attaching Instruments To The Respective Standard Lid Adapters

    Follow the general safety information in "General placement of Dealing with adapters_Sirona_Nitram instruments DAC UNIVERSAL ADVANCED [ → 115]" or "General placement of instruments DAC UNIVERSAL STANDARD [ → 187]" when handling the adapters described here. Attachment 1. Press the straight or contra-angle handpiece onto the adapter until you hear and feel a slight click.

  • Page 221: Adapter For Kavo Multiflex

    2. Pull lightly on the highspeed handpiece to ensure that it is correctly attached to the adapter. Removal ➢ Hold the STANDARD lid of the DAC UNIVERSAL firmly with one hand and simultaneously detach the KaVo highspeed handpiece. 60 53 362 D3472...

  • Page 222: Adapter For Contra-Angle Handpiece Head

    Removal ➢ Hold the STANDARD lid of the DAC UNIVERSAL firmly with one hand and simultaneously detach the contra-angle handpiece head. IMPORTANT To reprocess the instrument without the head use the ISO/INTRAmatic adapter, see "ISO/INTRAmatic and Osada HL-C adapter [ →...

  • Page 223: Adapter For W&H Roto Quick

    Follow the general safety information in "General placement of Dealing with adapters_Sirona_Nitram instruments DAC UNIVERSAL ADVANCED [ → 99]" or "General placement of instruments DAC UNIVERSAL STANDARD [ → 172]" when handling the adapters described here. Attachment 1. Press the W&H highspeed handpiece onto the adapter until you hear and feel a slight click.

  • Page 224: Adapter For Sirona Quick Coupling R/F/B

    2. Pull lightly on the highspeed handpiece to ensure that it is correctly attached to the adapter. Removal ➢ Hold the STANDARD lid of the DAC UNIVERSAL firmly with one hand and simultaneously detach the Sirona highspeed handpiece. 60 53 362 D3472...

  • Page 225: Adapter For Sirona T1 Classic/Te

    3. Pull lightly on the straight or contra-angle handpiece to ensure that it is correctly attached to the adapter. Removal ➢ Hold the STANDARD lid of the DAC UNIVERSAL firmly with one hand and detach the T1 CLASSIC/TE straight or contra-angle handpiece.

  • Page 226: Bien Air Unifix Adapter

    Follow the general safety information in "General placement of Dealing with adapters_Sirona_Nitram instruments DAC UNIVERSAL ADVANCED [ → 99]" or "General placement of instruments DAC UNIVERSAL STANDARD [ → 172]" when handling the adapters described here. Attachment 1. Press the BienAir highspeed handpiece onto the adapter until you hear and feel a slight click.

  • Page 227: Adapter For Castellini Ceramic Freedom

    Follow the general safety information in "General placement of Dealing with adapters_Sirona_Nitram instruments DAC UNIVERSAL ADVANCED [ → 99]" or "General placement of instruments DAC UNIVERSAL STANDARD [ → 172]" when handling the adapters described here. Attachment 1. Press the Castellini highspeed handpiece onto the adapter until you hear and feel a slight click.

  • Page 228: Adapter For Nsk Ptl

    Follow the general safety information in "General placement of Dealing with adapters_Sirona_Nitram instruments DAC UNIVERSAL ADVANCED [ → 99]" or "General placement of instruments DAC UNIVERSAL STANDARD [ → 172]" when handling the adapters described here. Attachment: 1. Press the NSK highspeed handpiece onto the adapter until you hear and feel a slight click.

  • Page 229: 10Adapter For Nsk Qdj

    Follow the general safety information in "General placement of Dealing with adapters_Sirona_Nitram instruments DAC UNIVERSAL ADVANCED [ → 99]" or "General placement of instruments DAC UNIVERSAL STANDARD [ → 172]" when handling the adapters described here. Attachment 1. Press the NSK highspeed handpiece onto the adapter until you hear and feel a slight click.

  • Page 230: 11Midwest/Iso 4/5-Hole Fixed Connection Adapter

    Follow the general safety information in "General placement of Dealing with adapters_Sirona_Nitram instruments DAC UNIVERSAL ADVANCED [ → 99]" or "General placement of instruments DAC UNIVERSAL STANDARD [ → 172]" when handling the adapters described here. Attachment 1. Attach the Midwest/ISO 4/5-hole highspeed handpiece with fixed connection to the adapter.

  • Page 231: 12Adapter For Borden 2/3-Hole Fixed Connection

    Follow the general safety information in "General placement of Dealing with adapters_Sirona_Nitram instruments DAC UNIVERSAL ADVANCED [ → 99]" or "General placement of instruments DAC UNIVERSAL STANDARD [ → 172]" when handling the adapters described here. Attachment 1. Attach the Borden 2/3-hole highspeed handpiece with fixed connection to the adapter.

  • Page 232: 13Adapter For Morita Alpha

    Follow the general safety information in "General placement of Dealing with adapters_Sirona_Nitram instruments DAC UNIVERSAL ADVANCED [ → 99]" or "General placement of instruments DAC UNIVERSAL STANDARD [ → 172]" when handling the adapters described here. Attachment 1. Press the ring at the bottom of the adapter down and attach the Morita highspeed handpiece onto the adapter as far as possible until you hear and feel a slight click.

  • Page 233: 14Adapter For Morita Cp4

    Follow the general safety information in "General placement of Dealing with adapters_Sirona_Nitram instruments DAC UNIVERSAL ADVANCED [ → 99]" or "General placement of instruments DAC UNIVERSAL STANDARD [ → 172]" when handling the adapters described here. Attachment 1. Press the Morita highspeed handpiece onto the adapter until you hear and feel a slight click.

  • Page 234: 15Adapter For Osada Ofj

    Follow the general safety information in "General placement of Dealing with adapters_Sirona_Nitram instruments DAC UNIVERSAL ADVANCED [ → 99]" or "General placement of instruments DAC UNIVERSAL STANDARD [ → 172]" when handling the adapters described here. Attachment 1. Press the ring at the bottom of the adapter down and attach the Osada highspeed handpiece onto the adapter as far as possible until you hear and feel a slight click.

  • Page 235: 16Adapter For Yoshida Quick Joint

    Follow the general safety information in "General placement of Dealing with adapters_Sirona_Nitram instruments DAC UNIVERSAL ADVANCED [ → 99]" or "General placement of instruments DAC UNIVERSAL STANDARD [ → 172]" when handling the adapters described here. Attachment 1. Press the Yoshida highspeed handpiece onto the adapter until you hear and feel a slight click.

  • Page 236: 17Ems Ultrasonic Scaler Without Light Adapter

    IMPORTANT Link software version_Sirona_Nitram The EMS adapter may be used with a DAC UNIVERSAL in connection with software version 3.4.31 or higher. The software version of your DAC UNIVERSAL can be found in the menu under "About", see "Info [ →...

  • Page 237: 18Adapter For Ems Ultrasonic Scaler With Light

    IMPORTANT Link software version_Sirona_Nitram The EMS adapter may be used with a DAC UNIVERSAL in connection with software version 3.4.31 or higher. The software version of your DAC UNIVERSAL can be found in the menu under "About", see "Info [ →...

  • Page 238: Adapters For The Flex Lid

    FLEX lid adapters_Sirona 6536127 Sirona Adapter for Scaler tips (FLEX lid) 6536135 Sirona Adapter Scaler TL, for SIROSonic TL and Periosonic (FLEX“ lid) 6536143 Sirona Adapter Scaler L, for SIROSonic and SIROSonic L (FLEX lid) 6536150 Sirona Adapter Sprayvit, for Sprayvit Düse G (FLEX lid) 6536168 Sirona Adapter Sprayvit 4000, for Sprayvit Düse 4000 (FLEX lid)

  • Page 239: Adapter Scaler Tl

    2. Pull lightly on the PerioSonic/SIROSonic TL handpiece to ensure that it is correctly attached to the adapter. Removal ➢ Hold the FLEX lid of the DAC UNIVERSAL firmly with one hand and simultaneously detach the PerioSonic/SIROSonic TL handpiece. Adapter Scaler L 11.2.1.3...

  • Page 240: Adapter Sprayvit

    2. Pull lightly on the SIROSonic/SIROSonic L handpiece to ensure that it is correctly attached to the adapter. Removal ➢ Hold the FLEX lid of the DAC UNIVERSAL firmly with one hand and simultaneously detach the SIROSonic/SIROSonic L handpiece. Adapter Sprayvit 11.2.1.4...

  • Page 241: Nitraclean Cleaning Tablet

    2. Pull lightly on the SPRAYVIT 4000 nozzle to ensure that it is correctly attached to the adapter. Removal ➢ Hold the FLEX lid of the DAC UNIVERSAL firmly with one hand and simultaneously detach the SPRAYVIT 4000 nozzle. 11.3...

  • Page 242: Printer

    ● Serial interface: RS232 Output information STANDARD lid, BASKET lid and WRAPPED lid: The following information is given by the printer: ● Serial number of the DAC UNIVERSAL ● Program ● Cycle number ● Date (DD-MM-YYYY) and time (HH:MM:SS) (Start) ●...
  • Page 243 Not all of these phases are included for all lid types. The ones not included are printed as “Deactivated”. If any of the phases has failed see „Display messages DAC UNIVERSAL Printer output information without FLEX lid_Sirona_Nitram ADVANCED [ → 140]“ or "Display messages DAC UNIVERSAL STANDARD [ →...
  • Page 244 11 Accessories Sirona Dental A/S 11.4 Printer Operating Instructions DAC UNIVERSAL If any of the phases has failed see „Display messages DAC UNIVERSAL ADVANCED [ → 140]“ or "Display messages DAC UNIVERSAL STANDARD [ → 211]". 60 53 362 D3472 D3472.201.10.20.02 07.2016...

  • Page 245: Consumables, Spare Parts, And Tools

    O-ring for Morita CP4 adapter V2, small (10x) 6352954 O-ring for Morita CP4 adapter V2, large (10x) 6051804 Adapter for NSK PTL 6079938 * O-ring for NSK turbine / Sirona TE (10x) 6051812 Adapter for NSK QDJ 6587245 O-ring A for NSK QDJ adapter (10x) 6347319 O-ring B for NSK QDJ adapter / W&H adapter,...
  • Page 246 OFJ (10x) 6051705 Adapter for Sirona T1 CLASSIC/TE 1 6079938 O-ring for NSK turbine / Sirona TE (10x) * Internal O-rings on adapters may be replaced only by qualified service technicians Ultrasonic scaler ME Spare O- Spare O-ring designation...

  • Page 247: Disposal

    Sirona Dental A/S 13 Disposal Operating Instructions DAC UNIVERSAL Disposal In accordance with Directive 2012/19/EU and national disposal regulations regarding old electrical and electronic devices, please be advised that such items must be disposed of in a special way within the European Union (EU).
  • Page 248 tÉ=êÉëÉêîÉ=íÜÉ=êáÖÜí=íç=ã~âÉ=~åó=~äíÉê~íáçåë=ïÜáÅÜ=ã~ó=ÄÉ=êÉèìáêÉÇ=ÇìÉ=íç=íÉÅÜåáÅ~ä=áãéêçîÉãÉåíëK «=páêçå~=aÉåí~ä=^Lp=OMNS péê~ÅÜÉW ÉåÖäáëÅÜ mêáåíÉÇ=áå=aÉåã~êâ aPQTOKOMNKNMKOMKMO MTKOMNS ûKJkêKW= ahMRNT páêçå~=aÉåí~ä=^Lp SM=RP=PSO=aPQTO oÜç=NM lêÇÉê=kç ahJUPUO=eáååÉêìé RNMMNMJOQi|p aÉåã~êâ 0088 ïïïKëáêçå~KÅçã...

Table of Contents

Save PDF