Sirona SIROLaser Xtend Operating Instructions Manual page 44

5 Operation
5.5 Main home screen
44
NOTE
Between 1 kHz -10 kHz the duty cycle cannot be below 10% and
above 90% due to physical limits. So at 1 kHz -10 kHz any input
below 10% will result in an error message. Values below 10% have to
be increased to at least 10% and values above 90% have to be
decreased to at most 90%.
Also due to physical limits the chopped mode is not possible with an
average power below 0.05 W. If the user wants to set the chopped
mode below this value an error message appears: "Chopped mode
available only with an average power above 0.05 W."
The peak-pulse mode is not possible with an average power below
0.3 W. If the user wants to set the peak-pulse mode below this value
an error message appears: "Peak Pulse available only with an
average power above 0.3 W."
When returning from peak-pulse mode to chopped mode note that the
average power will remain and the power will be calculated regarding
a preset duty cycle of 50%.
6. Energy
in our example, 0 J (joule). The system calculates the energy used
during treatment (in J) from the power values and the laser activation
time. So as soon as application is started and time running the energy
will be calculated and accumulated as long as the laser is active.
7. Average power
in our example, 3 W (watt). The system calculates the average power
(in W) from the power values and the selected duty cycle.
Further more the example here shows:
8. Back button
By pushing the back button you will jump back one screen.
9. Favorite button
The favorite function is only available after the upgrade.
By pushing the 'save as favorite' button this program will be linked to the
favorite submenu.
This is the 'delete favorite' button to delete the link from the favorite
submenu.
10. Help button
By pushing the 'help' button the help menu will be opened and you can
read additional information about this treatment.
Sirona Dental Systems GmbH
Operating Instructions SIROLaser Xtend
63 18 351 D3576
D3576.201.01.05.02 11.2018