Sirona SIROLaser Xtend Operating Instructions Manual page 28

4 Installation
4.4 Initial start-up – procedure for proper assembly
2 .
2 .
1.
28
8. If the aiming beam projects a uniform circular beam pattern, remove
the distal seal with the fibercutter, see chapter „Adjusting the optical
fiber with the fiber cutter" [→ 30]. Any liability of the manufacturer
regarding mechanical damage to the optical fiber is thereby
canceled.
9. Insert the handpiece body back into the handpiece sleeve making
sure that the optical fiber slides easily through the single-use tip.
Also check if the snap tabs have clicked into their rests.
3 .
10. Now you can insert the single-use tip and the optical fiber into the
bending tool and bend the single-use tip to the angle that you need
for best handling.
Sirona Dental Systems GmbH
Operating Instructions SIROLaser Xtend
63 18 351 D3576
D3576.201.01.05.02 11.2018