Instructions - Sirona SIROLaser Xtend Operating Instructions Manual

Sirona Dental Systems GmbH
Operating Instructions SIROLaser Xtend
Internal calibration check:
1 Watt level is being
checked when finger
switch is pressed for three
seconds. Confirmation via
'OK'.
For informations of the cal-
ibration check, see chap-
ter "Calibration check"
[→ 46].
External calibration check:
3 Watt level is being
checked when laser beam
is directed to the power
meter and finger switch is
pressed for three seconds.
Confirmation via 'OK'.
63 18 351 D3576
D3576.201.01.05.02 11.2018
5.5.5.2

Instructions

Internal calibration check:
3 Watts level is being
checked when finger
switch is pressed for three
seconds. Confirmation via
'OK'.
External calibration check:
5 Watt level is being
checked when laser beam
is directed to the power
meter and finger switch is
pressed for three seconds.
Confirmation via 'OK'.
Internal calibration check:
5 Watts level is being
checked when finger
switch is pressed for three
seconds. Confirmation via
'OK'.
To perform any calibration
check it is advised to read
the user manual carefully.
Confirmation via 'OK'.
For informations of the cal-
ibration check, see chap-
ter "Calibration check"
[→ 46].
5 Operation
5.5 Main home screen
External calibration check:
1 Watt level is being
checked when laser beam
is directed to the power
meter and finger switch is
pressed for three seconds.
Confirmation via 'OK'.
Confirmation if link shall
be deleted from 'Fa-
vorites'. To be confirmed
via 'OK' or returned to pre-
vious screen via 'Cancel'.
53