Enter Pin Code; Main Home Screen - Sirona SIROLaser Xtend Operating Instructions Manual

5 Operation

5.4 Enter pin code

38
Enter pin code
5.4
The SIROLaser Xtend may be operated only by authorized personnel
and has an electronic key for security purposes.
1. For "User 1" enter the pin code 2 9 7 4, for "User 2" 6 2 5 1.
2. To enter the pin code press 'OK'.
WARNING
Do not give the access code to unauthorized third parties. Risk of
misuse of the laser by unauthorized persons!
After the upgrade these pin codes are changeable in the set-up menu.
NOTE
In case the key user forgets his/her pin code please enter the super
pin code 2 8 7 7. The super pin code is never changeable.
Note that when you switch on the device for the first time, the pincode
3 3 3 4 is to be entered. It changes the country setting to "Non-US",
see chapter "Country setting" [→ 50]. Then you will have access to
the full range of pre-set indications.

Main home screen

5.5
The following section describes the main home screen. The main home
screen allows you to enter the submenus:
● Favorites
In this submenu you will be able to save all your favorite applications
(only available after the upgrade).
● Endodontics, Periodontology, Surgery and Miscellaneous
After opening the submenu, you will be able to select among
different indications with preset treatment parameters. All submenus
are structured the same way.
● My Settings
In this submenu you will be able to save applications that you have
newly programmed and applications that you have changed (and
renamed).
● Set-up
Within this submenu you will be able to configure the SIROLaser
Xtend to your needs as well as you will find all necessary set-up and
service programs.
Sirona Dental Systems GmbH
Operating Instructions SIROLaser Xtend
63 18 351 D3576
D3576.201.01.05.02 11.2018