Sirona SIROLaser Xtend Operating Instructions Manual page 43

Sirona Dental Systems GmbH
Operating Instructions SIROLaser Xtend
63 18 351 D3576
D3576.201.01.05.02 11.2018
Peak-pulse
When pushing the 'PP' button the peak-pulse mode is set and in the
control field appears "PP". Via 'OK' you will be proceeded back to the
treatment submenu in which you can further adjust the time and
average power. The power will be preset to 10 W peak-pulse, after the
upgrade to 14 W. The duty cycle will be calculated. To vary the applied
power you will now be able to adjust the average power.
To return from peak-pulse to any other laser operation mode please
enter the frequency screen and choose either 'CW' (for continuous
wave mode) or a certain frequency (for chopped mode).
5 Operation
5.5 Main home screen
43