Switch On Power - Sirona SIROLaser Xtend Operating Instructions Manual

Sirona Dental Systems GmbH
Operating Instructions SIROLaser Xtend
63 18 351 D3576
D3576.201.01.05.02 11.2018

Switch on power

5.2
After starting the SIROLaser Xtend by switching on the on/off button on
the backside of the control unit the yellow LEDs will blinking on.
While the SIROLaser Xtend is booting information about the software
version and the set language as well as the advice to read the user
manual will be displayed.
When starting the SIROLaser Xtend for the very first time you will
automatically be asked to set-up the unit. Please proceed as requested:
1. Country setting
For all users except US users: Change the pre-set country setting to
Non-US and confirm the selection.
Enter the pin code 3 3 3 4 and press 'OK '.
See also chapter "Country setting" [→ 50].
Ä Now you will have access to the full range of pre-set
indications.
WARNING
It's forbidden to change the country setting to Non US if you belong to
US legal regulations. The use of the country setting Non US is not
authorised by the FDA.
2. Date & time
Please enter the appropriate date & time and press 'OK'. See also
chapter "Date & time" [→ 50].
5 Operation
5.2 Switch on power
35