Viewing Rs-232 Drivers; Viewing The Ip Link Ir Package Version; Key To File Names - Extron electronics MediaLink MLC 52 IR User Manual

im Vertrieb von
Serial Communication, cont'd

Viewing RS-232 drivers

To view the settings and commands in each projector driver file without loading
the driver into the MLC, run the MLC 52 control software in emulation mode. See
Using emulation mode, later in this chapter.
1.
2.
3.
4.
For information on loading a driver to the MLC 52, see Loading Extron drivers for
RS-232 communication, in the Assigning functions to buttons using RS-232 drivers
section, later in this chapter.

Viewing the IP Link IR package version

To find out the version number of the IP Link IR package that you have, do the
following:
1.
2.

Key to file names

File name
________.MLL
________.MLK
________.EIR
www.camboard.de
5-6 MLC 52 Series MediaLink Controller • Serial Communication
CAMBOARD Electronics
Open the MLC 52 configuration program.
On the Comm Port Selection screen, select Emulate.
Locate and open the drivers folder on your PC hard drive, at the following
location:
c:\Program Files\Extron\Medialink\drivers.
Select and open the file for the desired projector driver in the Drivers folder.
Open the MLC 52 configuration program.
Click Help on the menu bar to display the Help menu. The item
DriverBase Version = n gives the IP Link IR package version.
IR drivers are stored at the following location:
c:\Program Files\Extron\driver2
Description
Extron-supplied projector driver library files. These files contain
commands and settings pertinent to a particular projector.
User-saved MLC/MLC-MLS/MLS configuration file. This
includes adjustments/settings and whatever driver (if any) was
installed in the MLC at the time the file was saved.
IP Link IR drivers
Tel. 07131 911201
Fax 07131 911203
ce-info@camboard.de