Danfoss MCO 305 Design Manual page 55

MCO 305 Design Guide
Function Keys
Frequently used functions are allocated to the function keys, e.g. with [F12] you can call-up the Command
List for comfortable programming. Or with [F1] you can access the on-line help. The other function keys will
be mentioned at the corresponding situation.
File Menu
The File menu contains all the commands to close, save, print, and exit a program. All commands can be
used with a mouse click or with the key combination [Alt] and the underlined letter, as it is usual.
File New
New files must be created via MCT 10.
File Open
Select the file via the MCT 10. APOSS and with that
the file is opened automatically.
File Save as
Please use the features of the MCT 10 to rename a
program file (*.m) or to copy it..
Write to drive
Clicking on Write to drive will compile the current file being edited, make a connection to the drive and
download the compiled file to temporary memory on the controller.
If the download was successful, then the program is saved in permanent memory. If MCT 10 requests it,
then the source code is also downloaded to the drive.
Export / Import
The Export/Import buttons allows a directly accessing to the .m files in MTC 10 online mode:
Clicking on File Export will display the "Save As" dialog and allow saving the .m file in a directory that the
user chooses.
Clicking on File Import will display the "Open File" dialog and allow the user to import a previously saved
.m file.
NB!:
The imported file will overwrite the incore version of the existing .m file being edited, i.e. it will
delete everything that is currently editing and replace it with the contents of the imported file. Use
"Quit", if you do not want to overwrite; then the original file, that you edited is still unchanged.
Exit Program
The APOSS program can be ended by clicking on
saved a new file or changes to an old file then you will have the chance to do this.
NB!:
However, Exit Program does not end a program running in the controller. You can only abort or end
a program with [Esc]. In order to do this the file which is linked with the controller must be open
or re-opened.
NB!:
However, if the controller stops at File
controller is sending PRINT commands which can no longer be displayed by the communications
window.
__ PC Software Interface __
Exit Program or on the
Exit Program then this can be due to the fact that the
®
MG.33.L4.02 – VLT is a registered Danfoss trademark
MCT online MCT offline
icon. If you have not yet
stand-alone
55