Danfoss MCO 305 Design Manual page 214

MCO 305 Design Guide
Parameter Lists
The parameters are determined by parameter numbers. We recommend using the alphabetical overview as
a guide; then you will be able to find detailed information very quickly using the number.
Changes during operation
"TRUE" means that the parameter can be changed, while the frequency converter is in operation.
"FALSE" means that the frequency converter must be stopped before a change can be made.
4-Set-up
"1-Set-up": Data value will be the same in all set-ups.
Conversion index
This number refers to a conversion figure used
when writing or reading by means of a frequency
converter.
Please see for all conversion indices the FC 300
Design Guide.
Data type
Please see for all data types the FC 300 Design
Guide.
Application Parameters, Parameter List
Par. No. # Parameter name
19-0* Application Parameters
19-00
...
19-89
19-9* Read-only Application Parameters
19-90
19-91
19-92
19-93
19-94
19-95
19-96
19-97
19-98
19-99
default setting
214
__ Parameter Reference __
Parameter description
Application parameters
Application parameters
Application parameter 90
Application parameter 91
Application parameter 92
Application parameter 93
Application parameter 94
Application parameter 95
Application parameter 96
Application parameter 97
Application parameter 98
Application parameter 99
[ ] value for use in communication via serial communication port
®
MG.33.L4.02 – VLT is a registered Danfoss trademark
Conversion index
Conversion factor
Data type Description
2 Integer 8
3 Integer 16
4 Integer 32
5 Unsigned 8
6 Unsigned 16
7 Unsigned 32
Default Changes during
setting operation
0 'TRUE'
TRUE
0 TRUE
0 read only
1 set-up
0 read only
1 set-up
0 read only
1 set-up
0 read only
1 set-up
0 read only
1 set-up
0 read only
1 set-up
0 read only
1 set-up
0 read only
1 set-up
0 read only
1 set-up
0 read only
0
1
Type
Int8
Int16
Int32
Uint8
Uint16
Uint32
4-set-up Conver- Type
sion
index
1 set-up 0 Int32
Int32
0
Int32
0
Int32
0
Int32
0
Int32
0
Int32
0
Int32
0
Int32
0
Int32
0