Danfoss MCO 305 Design Manual page 228

MCO 305 Design Guide
File name or
topic
Online
help
x
DIM_01.M
x
DORIG_01.M
x
Enc-S.m
x
ERROR_01.M
x
EXIT_01.M
x
Feed-forward
Calculation
x
GETP_01.M
x
GOSUB_01.M
x
GOTO_01.M
x
HOME_01.M
x
IF_01.M
x
IN_01.M
x
INB_01.M
x
INB_02.M
x
INCL_01.M
x
INCIN01.M
x
INCPOS01.M
x
INCSTA01.M
x
INDEX_01.M
x
INKEY_01.M
x
LOOP_01.M
x
Marker.m
x
Marker count
x
Marker
Synchronization
x
Mechanical Brake
Control
x
MOTOR_01.M
x
Move-S.m
x
MSTOP_01.M
x
NOWAI_01.M
x
ONINT_01.M
228
__ Appendix __
Where to find? Description
Manual or
Software
Records and displays of a speed-diagram.
Defines different current positions as the real zero point.
APOSS Software Encoder test program.
Evaluates an error status by the error number.
Panel game: You have to guess a digit.
MCO 305 Operating Feed-forward Calculation
Instructions
Displays the current PID control parameters.
Displays time and position information during a movement.
The current time since program start is displayed every five
seconds.
Moves drives 1 to the device zero point (reference switch).
Evaluates an error status by the error number.
Displays the status of all digital inputs.
Displays the status of all digital inputs.
Displays the signal levels of all digital inputs and transfers them to
the outputs. The display and the outputs are updated every time
one of the inputs changes its status
Displays some system information.
Include file:
Displays the status of inputs (graphic)
Include file:
Display of the current and command position.
Include file:
Subprogram to display the system status in plain text.
Searches the index pulse of the encoder.
Intelligent input of a max. nine digit number and calculation of the
cross sum.
Displays random horizontal bars.
APOSS Software CAM Control: Printing of Cardboard Boxes with Marker Correction
Measurement of marker distance in connection with SYNCM
Design Guide Marker Synchronization for "Packaging with Varying Product
page 33 Distance and Slip" application sample.
Design Guide Relative Positioning with Mechanical Brake
page 45
Displays position information while the drive is moved by hand (axis
control disabled).
APOSS Software Test run program.
Aborts a position controlled movement and continues it after a short
delay.
Displays information during a motion.
Reaction to interrupts during a positioning motion.
®
MG.33.L4.02 – VLT is a registered Danfoss trademark