Danfoss MCO 305 Design Manual page 54

MCO 305 Design Guide
The context menus are closed automatically when
the selected function is being executed or if you
click on any other location on the screen with the
left mouse button.
Edit Window
In this window you can write your program with the assistance of the functions in the Edit menu just like in
a text editor. Different colors are used to distinguish between comments, program sections, operators,
numbers, etc. You can alter the colors using Settings
Communication Window
The Communication Window is the under part of the Edit Window. It shows the messages from the
controller, including the programmed PRINT commands and messages from the compiler.
Keyboard
All keys except the [Esc] key are used exactly as in standard Windows applications, for example arrows,
directions keys, etc.
[Esc] key
In addition to the standard functions of the [Esc] key, you can also use this key at any time to abort a
program running under APOSS.
NB!:
A rotating drive will slow down with the maximum allowed deceleration!
Short Cuts
Keys are often used as shortcuts with other keys either as a key combination or as a key sequence. For a
key combination you have to hold the first key depressed while you press the second key, e.g. [Shift] +
[Insert], in order to insert the contents of the notepad. For key sequences you can press the keys one after
the other, e.g. [Alt] + [O] in order to open the Edit menu.
Cut, Copy and Paste
... follows the Windows specifications, for example copying with [Cntl] + [Insert], or [Cntl] + [C].
Cursor Positioning
... follows the Windows specifications also, for example "Go to document end" with [Cntl] + [End], or "Go to
line n" with [Cntl] + [G].
Expand the Text Marked
... follows the Windows specification closely, for example "Text marked down one line" with [Shift] + [
Undo function
You can use [Alt] + [Backspace], or [Cntl] + [Z] to undo the last action.
NB!:
File Save deletes the Undo memory.
Record Macro
The following short cut could be instrumental in editing: [Cntl] + [Shift] + [R].
54
__ PC Software Interface __
Colors Editor.
®
MG.33.L4.02 – VLT is a registered Danfoss trademark
key.