Danfoss MCO 305 Design Manual page 233

MCO 305 Design Guide
What's New in the Update Version
New and Extended Parameters
Par. 32-50 Source Slave
Par. 32-82 Ramp Type
New SYSVAR Indices
4275 PFG_G_JSTATE
4277 PFG_G_JERKSTOPPATH
New Commands
VLTALARMSTAT
VLTCONTROL
VLTERRCLR
__ Appendix __
Choose Feedback Source for Slave.
Another ramp type '2' for all movements with limited jerk.
Jerk Duration JERKMIN
Defines the minimum time [ms] required before reaching the
maximum acceleration. Four different JERKMIN parameters are
available, see also "Limited Jerk" in chapter "Functions and Samples".
Contains the state of the Limited Jerk Movement state machine.
Delivers the length of the stop path
Returns if an alarm is active or not.
Sets the VLT control word in MOTOR OFF state
Clears a VLT-alarm
®
MG.33.L4.02 – VLT is a registered Danfoss trademark
.
233