Table of Contents
Advertisement
Figure 25. Installing the system cover
Next steps
Follow the procedure listed in
After working inside your system
on page 44.
Drive backplane cover
Removing the drive backplane cover
Prerequisites
1. Follow the safety guidelines listed in the
Safety instructions
on page 43.
2. Follow the procedure listed in the
Before working inside your system
on page 44.
NOTE:
Route the cables properly to prevent the cables from being pinched or crimped.
Steps
1. Press and push the blue touch points to disengage the drive backplane cover.
2. Remove the cover from the chassis.
Installing and removing system components
51
Advertisement
Table of Contents
