Rear View Of The System - Dell EMC PowerEdge R7515 Installation And Service Manual

Rear view of the system

Figure 7. Rear view of the system with two rear drives
Table 6. Rear view of the system with two rear drives
Item Ports, panels, or slots
1 Serial port
2 Drive
3 PCIe expansion card riser 1A
(slot 2)
4 PCIe expansion card riser 2
(slot 3)
5
Power supply unit (PSU)
6
Power supply unit (PSU)
7
LOM Riser Ethernet port
(2) (Optional) (slot 1)
8 Ethernet ports (2)
9 USB 3.0 port (2)
10 iDRAC dedicated port
11 VGA port
12 System status indicator
cable port (CMA)
13 System identification button
Icon Description
Enables you to connect a serial device to the system. For more
information, see the
N/A Enables you to install drives that are supported on your system. For
more information about drives, see the
section.
N/A
The expansion card riser enables you to connect PCI Express expansion
cards. For more information on the expansion cards that are supported
on your system, see
N/A
The expansion card riser enables you to connect PCI Express expansion
cards. For more information on the expansion cards that are supported
on your system, see
N/A For more information about the PSU configurations, see the
Specifications
N/A For more information about the PSU configurations, see the
Specifications
The NIC ports that are integrated on the LAN on Motherboard (LOM)
riser provide network connectivity. For more information about the
supported configurations, see
The Ethernet ports that are integrated on the system board provide
network connectivity. These NIC ports can also be shared with iDRAC
when iDRAC network settings is set to shared mode. For more
information about the supported configurations, see the
Specifications
These USB ports support USB 3.0.
Enables you to remotely access iDRAC. For more information, see the
iDRAC User's Guide at www.dell.com/poweredgemanuals.
Enables you to connect a display device to the system. For more
information, see the
N/A Enables you to connect the status indicator cable and view system
status when the CMA is installed.
Press the system ID button:
Technical Specifications
Drive specifications
Technical Specifications
Technical Specifications
section.
section.
theTechnical Specifications
section.
Technical Specifications
section.
on page 149
section.
section.
Technical
Technical
section.
Technical
section.
System overview 13