Table of Contents
Advertisement
System diagnostics and indicator codes
The diagnostic indicators on the system front panel display system status during system startup.
Topics:
•
Status LED indicators
•
System health and system ID indicator codes
•
iDRAC Quick Sync 2 indicator codes
•
iDRAC Direct LED indicator codes
•
LCD panel
•
NIC indicator codes
•
Power supply unit indicator codes
•
Drive indicator codes
•
Using system diagnostics
Status LED indicators
NOTE:
The indicators display solid amber if any error occurs.
Figure 133. Status LED indicators
Table 72. Status LED indicators and descriptions
Icon
Description
Drive indicator
Temperature
indicator
158
System diagnostics and indicator codes
Condition
The indicator turns solid amber if
there is a drive error.
The indicator turns solid amber if the
system experiences a thermal error
(for example, the ambient
temperature is out of range or there
is a fan failure).
Corrective action
•
Check the System Event Log to determine if the
drive has an error.
•
Run the appropriate Online Diagnostics test. Restart
the system and run embedded diagnostics (ePSA).
•
If the drives are configured in a RAID array, restart
the system, and enter the host adapter configuration
utility program.
Ensure that none of the following conditions exist:
•
A cooling fan has been removed or has failed.
•
System cover, air shroud, or back filler bracket is
removed.
•
Ambient temperature is too high.
•
External airflow is obstructed.
If the problem persists, see the
8
Getting help
section.
Advertisement
Table of Contents
