Table of Contents
Advertisement
Figure 119. Removing a power supply unit
Next steps
1.
Replace the power supply units
Installing a power supply unit
Prerequisites
1. Follow the safety guidelines listed in the
2. For systems that support redundant PSU, ensure that both the PSUs are of the same type and have the same maximum output
power.
NOTE:
The maximum output power (shown in watts) is listed on the PSU label.
3.
Remove the PSU
blank.
Steps
Slide the PSU into the PSU bay until the release latch snaps into place.
or
Install the PSU
blank.
Safety instructions
on page 43.
Installing and removing system components
129
Advertisement
Table of Contents
