Table of Contents
Advertisement
Figure 29. Removing the air shroud for system with rear drives
Next steps
1.
Replace the air
shroud.
Installing the air shroud
Prerequisites
1. Follow the safety guidelines listed in the
Safety instructions
on page 43.
2. Follow the procedure listed in the
Before working inside your system
on page 44.
Steps
1. Align the tabs on the air shroud with the slots on the chassis.
NOTE:
Route the cables properly to prevent the cables from being pinched or crimped.
2. Lower the air shroud into the system until it is firmly seated.
Installing and removing system components
55
Advertisement
Table of Contents
