Table of Contents
Advertisement
Figure 74. Removing the filler bracket
NOTE:
Store the filler bracket for future use. Filler brackets must be installed in empty expansion card slots to
maintain FCC certification of the system. The brackets also keep dust and dirt out of the system and aid in proper
cooling and airflow inside the system.
3. Holding the card on the edges, align the card with the expansion card connector on the system board.
4. Press the expansion card until it is firmly seated in the slot on the system board.
5. Close the expansion card retention latch.
96
Installing and removing system components
Advertisement
Table of Contents
Need help?
Do you have a question about the PowerEdge R7515 and is the answer not in the manual?