Table of Contents
Advertisement
Table 46. Riser configurations: Riser 1B – CPU (continued)
Card type
PERC 10 : External adapter (H840, LP)
HBA : External adapter (LP)
Internal storage (BOSS, LP)
PERC 9 : Mini mono (H730P/H330)
PERC 10 : Mini mono (H740P)
HBA : Mini mono (HBA330)
LOM riser ( 2x1G)/(2x10G)/(2x25G)
Removing the expansion card riser
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Remove the air
shroud.
4. If installed,
remove the rear drive
5. Disconnect any cables connected to the expansion card.
6. If installed, remove the PCIe filler bracket.
Steps
For riser 2, holding the blue touch points, lift the expansion card riser from the system.
Figure 66. Removing the riser 2
a. For the riser 1A, loosen the captive screw and then holding the blue touch points lift the riser from the system.
90
Installing and removing system components
Slot priority
5, 4
5, 4
5, 4
Integrated slot
Integrated slot
Integrated slot
1
Safety instructions
on page 43.
Before working inside your system
cage.
Maximum number of cards
2
2
1
1
1
1
1
on page 44.
Advertisement
Table of Contents
